Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 1931 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to Allow one zone to another zone access

Md Shahidul Islam

Hi,

I want to access my access point which are in zone called B (ip range: 172.16.1.1) and my computer are in another zone called A(ip range: 192.168.100.1) now how I can access the access point from Zone A to Zone B. Please help me to setup firewall rule how to allow ..



This thread was automatically locked due to age.
  • 0

    Hi,

    you would create a firewall rule source LAN -> ANY, destination LAN -> Any, Allow all and put it at the top of your rule list. Orif you want to be specific change the ANY to be the networks of both LANS and put both networks in the rule eg source LAN -> network a, Network B, destination -> Network A, Network B, allow all.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Thanks for your reply.

    1. I need only my pc can communicate with zone B.other no.

    2. If I put source : Zone A devices: my pc mac and destination source: zone B ,any ,any it will work???

    I need to create NAT ???

  • 0 in reply to Md Shahidul Islam

    Hi,

    Source LAN, pc ip address, destination LAN, network b, allow all, you do not need a NAT.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML