Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 8949 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

External access from DMZ

Jenson Jacob

Hi,

I have a few servers in DMZ, all of them have static-ip and geateway, we haven't configured DNS since we dont want these servers to resolve names.

We have a web server in wan side but when we try to access it from DMZ the log says Default Drop. How can I resolve this?.

I have created a MASQ rule DMZ to WAN.

Also created firewal rule DMZ -> any service to WAN.

I have turned of all shields except firewall.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    looks like the firewall rule is not matching.

    Is the subnet 192.168.20.xx your "WAN" subnet? If yes, you don't need MASQ because you can route between this subnets with the UTM.

    Please post a screenshot of your interfaces and the firewall rule. It will help us to help you.

     

    Jas

     

Reply
  • 0

    Hi,

    looks like the firewall rule is not matching.

    Is the subnet 192.168.20.xx your "WAN" subnet? If yes, you don't need MASQ because you can route between this subnets with the UTM.

    Please post a screenshot of your interfaces and the firewall rule. It will help us to help you.

     

    Jas

     

Children
No Data
Unfiltered HTML