This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hairpin routing NAT

I'm hairpin routeing off my Internal interface between 2 subnets and can ping but not RDP.  When I RDP from 10.10.39.138 t0 192.168.25.21 I only see return traffic in the logs.

13:51:45         Suspicious TCP state          TCP          192.168.25.21:51485→ 10.10.39.138:52438          [ACK RST]          len=40          ttl=127          tos=0x00          srcmac=00:03:47:71:5d:3d          dstmac=00:15:17:24:aa:30

Any suggestions?  Something with nat perhaps?

This thread was automatically locked due to age.

Parents

0 timdoty17545 over 10 years ago

As far as NAT goes, I don't want this traffic NAT'd at all, just routed while retaining the source and destination IPs
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 timdoty17545 over 10 years ago

As far as NAT goes, I don't want this traffic NAT'd at all, just routed while retaining the source and destination IPs
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data