This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Outlook RPC over http

Hi @ all,

Outlook Web Access works fine with Astaro, but I have problems with
ROC over http(s) to connect to my mailserver.

Any ideas?

The MS Exchange settings are fine, at the moment it works with an isa server, but I want to kill the isa server.

Thanks!

This thread was automatically locked due to age.

0 Billybob over 19 years ago

I am assuming you mean RPC over https. For rpc endpoint mapper you need ports 135/tcp, 135/udp. Ofcourse you need 443 for https. Here is an article from MS on basic AD ports if you are running AD and exchange on the same box. Its for win2000 but I am sure it applies to win2k3 also. http://www.microsoft.com/technet/prodtechnol/windows2000serv/technologies/activedirectory/deploy/confeat/adrepfir.mspx

HTH[:D]
0 Faceman over 19 years ago

I got my RPC over HTTPS working by mapping DNATting from the external ip addr/interface to the internal address (Exchange server) and only allowing port 443. Then create a packet filter from to allow from ANY HTTPS traffic to your internal Exchange server. Hope this give you some insight.