This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

multiple ssh nat

I am trying to setup transparent ssh to servers inside the firewall.
I also need to keep the Astaro box ssh usable.
Has anyone else done this. I can forward port 22 with no problems but if I start to forward (for example: port 24) it is refused.
One way I can think of is to have the FW pass port 24 to server A on port 22 but I don't know how to set that up.
I am probably missing something.

This thread was automatically locked due to age.

0 Gert Hansen over 24 years ago

Hi Jon,

This is no problem just add the following configuration.

Add Service
-----------
'Redir SSH 1' tcp 1024:65535 24

Add DNAT Rule
-------------
'External Interface' 'Redir SSH 1' 'Server A' SSH

Add Packetfilter Rule
---------------------
'Any' 'SSH' 'Server A' 'Allow'

Now this should be working

kind regards
gert
- 0 Jon Griffin over 24 years ago in reply to Gert Hansen
  
  Thanks worked perfect.
  - 0 Jon Griffin over 24 years ago in reply to Jon Griffin
    
    Thanks worked perfect.