This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WiFi done right.... did i?

Servus!

Ich hab ne Frage zum Netzaufbau bezgl. WLAN.

Ich hab mehrere Sophos APs an meiner UTM home angeschlossen, was ... "soweit" recht gut funktioniert.
Hin und wieder kommt es jedoch zu aussetzern bei Clients. Die sind dann einfach disconnected. Nicht alle gleichzeitig, aber mal ist es ein Handy, mal ist es ein Notebook...
Mein Aufbau ist folgender:
Die Sophos hat ein VLAN interface und ist in VLAN 33, die APs bekommen per DHCP von der UTM in genau diesem Netz auch eine IP: 172.17.33.XY.
Im selben VLAN hab ich Clients für SSID1.
SSID2 ist über VLAN 122 "angeschlossen", die Sophos hat ebenfalls ein VLAN interface in diesem Netz.

Im normalfall funktioniert das "as intended". Nur eben diese Disconnects ab und an.

Ich frage mich ob es "Best Practice" ist ein extra VLAN für die APs zu verwenden und von den WiFi-Clients zu trennen?

Also noch ein drittes VLAN für WiFi in dem nur die APs sind.

Gibt es andere Ideen oder Vorschläge?



This thread was automatically locked due to age.
Parents
  • Halo  ,

    Vielen Dank, dass Sie sich an die Community gewandt haben, es gibt viele Faktoren und einer der beliebtesten ist das Signal-Rausch-Verhältnis. Es gibt verschiedene Anwendungen, die auf allen Plattformen auf Android, IOS und Windows verfügbar sind, um diese zu bestimmen.

    Darüber hinaus können Sie auch einen manuellen Kanal anstelle von Auto auswählen, um Überschneidungen zu vermeiden.

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • Guten Morgne Balfson!

    Also, ich hab mir das mal ein bisschen über die Console angeschaut:

    U-Boot 1.1.4-gb47de1b6 (Jan 24 2017 - 11:22:47)
    ELX version: 1.0.0
    
    7679WSC - Scorpion 1.0DRAM:
    sri
    Scorpion 1.0
    ath_ddr_initial_config(178): (32bit) ddr2 init
    tap = 0x00000003
    Tap (low, high) = (0x4, 0x1d)
    Tap values = (0x10, 0x10, 0x10, 0x10)
    128 MB
    Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18
    Flash [MX25L12845E] sectors: 256
    Flash: 16 MB
    In:    serial
    Out:   serial
    Err:   serial
    Net:   ath_gmac_enet_initialize...
    athrs_sgmii_res_cal: cal value = 0x1
    ath_gmac_enet_initialize: reset mask:c02200
    Scorpion ---->8035 PHY*
    AR8035 PHY reg init
    : cfg1 0x80000000 cfg2 0x7114
    eth0: 00:1a:8c:ab:bd:02
    AR8035 found!
    [0:4]Phy ID 4d:d072
    Port 0, Neg Success
    eth0 up
    eth0
    Setting 0x18116290 to 0x458ba14f
    Hit any key to stop autoboot:  0
    ## Booting image at 9f070000 ...
       Image Name:   MIPS OpenWrt Linux-3.18.11
       Created:      2021-12-13  16:34:11 UTC
       Image Type:   MIPS Linux Kernel Image (gzip compressed)
       Data Size:    7288148 Bytes =  7 MB
       Load Address: 80060000
       Entry Point:  80060000
       Verifying Checksum at 0x9f070040 ...OK
       Uncompressing Kernel Image ... OK
    
    Starting kernel ...
    
    [    0.000000] Linux version 3.18.11 (bamboo@ip-10-104-123-195) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #3 Mon Dec 13 16:33:57 UTC 2021
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
    [    0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 08000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
    [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
    [    0.000000] Kernel command line:  board=AP55 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),64k(art),64k(astaro_stat_cfg),7616k(astaro_image),64k(astaro_backup),64k(astaro_dyn_cfg) rootfstype=squashfs,jffs2 noinitrd
    [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
    [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Writing ErrCtl register=00000000
    [    0.000000] Readback ErrCtl register=00000000
    [    0.000000] Memory: 120484K/131072K available (2358K kernel code, 127K rwdata, 444K rodata, 5892K init, 184K bss, 10588K reserved)
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] NR_IRQS:51
    [    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
    [    0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
    [    0.060000] pid_max: default: 32768 minimum: 301
    [    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.070000] NET: Registered protocol family 16
    [    0.080000] MIPS: machine is Sophos AP55
    [    0.080000] registering PCI controller with io_map_base unset
    [    0.090000] ar724x-pci ar724x-pci.1: PCIe link is down
    [    0.090000] registering PCI controller with io_map_base unset
    [    0.320000] PCI host bridge to bus 0000:00
    [    0.330000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
    [    0.330000] pci_bus 0000:00: root bus resource [io  0x0000]
    [    0.340000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [    0.340000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
    [    0.350000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref]
    [    0.350000] PCI host bridge to bus 0000:01
    [    0.360000] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
    [    0.360000] pci_bus 0000:01: root bus resource [io  0x0001]
    [    0.370000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
    [    0.370000] pci 0000:00:00.0: using irq 40 for pin 1
    [    0.380000] Switched to clocksource MIPS
    [    0.380000] NET: Registered protocol family 2
    [    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.400000] TCP: reno registered
    [    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.420000] NET: Registered protocol family 1
    [    6.540000] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    6.550000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    6.560000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    6.570000] msgmni has been set to 235
    [    6.570000] io scheduler noop registered
    [    6.580000] io scheduler deadline registered (default)
    [    6.580000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    ▒[    6.610000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
    [    6.620000] console [ttyS0] enabled
    [    6.620000] console [ttyS0] enabled
    [    6.630000] bootconsole [early0] disabled
    [    6.630000] bootconsole [early0] disabled
    [    6.640000] m25p80 spi0.0: found mx25l12805d, expected m25p80
    [    6.640000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
    [    6.650000] 7 cmdlinepart partitions found on MTD device spi0.0
    [    6.660000] Creating 7 MTD partitions on "spi0.0":
    [    6.660000] 0x000000000000-0x000000040000 : "u-boot"
    [    6.670000] 0x000000040000-0x000000050000 : "u-boot-env"
    [    6.670000] 0x000000050000-0x000000060000 : "art"
    [    6.680000] 0x000000060000-0x000000070000 : "astaro_stat_cfg"
    [    6.680000] 0x000000070000-0x0000007e0000 : "astaro_image"
    [    6.690000] 0x0000007e0000-0x0000007f0000 : "astaro_backup"
    [    6.700000] 0x0000007f0000-0x000000800000 : "astaro_dyn_cfg"
    [    6.720000] libphy: ag71xx_mdio: probed
    [    7.390000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd072, driver=Atheros 8035 ethernet]
    [    7.400000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
    [    7.400000] TCP: cubic registered
    [    7.410000] NET: Registered protocol family 17
    [    7.410000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    7.420000] 8021q: 802.1Q VLAN Support v1.8
    [    7.450000] Freeing unused kernel memory: 5892K (8033f000 - 80900000)
    [    7.470000] init: failed to symlink /tmp -> /var
    [    7.470000] init: Console is alive
    [    7.480000] init: - watchdog -
    [    8.480000] init: - preinit -
    [    8.630000] random: mktemp urandom read with 13 bits of entropy available
    Press the [f] key and hit [enter] to enter failsafe mode
    Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
    [   10.720000] procd: - early -
    [   10.720000] procd: - watchdog -
    [   11.270000] procd: - ubus -
    [   12.280000] procd: - init -
    Please press Enter to activate this console.
    [   14.380000] Loading modules backported from Linux version v5.10.34-0-g0aa66717f684
    [   14.390000] Backport generated by backports.git v5.10.34-1-0-g7b5533e1
    [   14.440000] asf: module license 'Proprietary' taints kernel.
    [   14.450000] Disabling lock debugging due to kernel taint
    [   14.460000] ****Address of trace_timer :85e46530
    [   14.480000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
    [   14.500000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
    [   14.510000] ath_dfs: Version 2.0.0
    [   14.510000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
    [   14.520000] ath_spectral: Version 2.0.0
    [   14.520000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
    [   14.530000] SPECTRAL module built on Dec 13 2021 16:16:12
    [   14.540000] ath_tx99: Version 2.0
    [   14.540000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
    [   14.560000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
    [   14.660000] __ath_attach: Set global_scn[0]
    [   14.670000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead ***
    [   14.680000] ACBKMinfree = 48
    [   14.680000] ACBEMinfree = 32
    [   14.690000] ACVIMinfree = 16
    [   14.690000] ACVOMinfree = 0
    [   14.690000] CABMinfree = 48
    [   14.690000] UAPSDMinfree = 0
    [   14.700000] ATH_TXBUF=540
    [   14.710000] Enterprise mode: 0x33fc0000
    [   14.710000] Restoring Cal data from DRAM
    [   14.720000]
    ART Version : 10.347
    SW Image Version : 0.10.19.0.12
    Board Revision :
    [   14.730000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125
    [   14.730000] SPECTRAL : get_capability not registered
    [   14.740000] HAL_CAP_PHYDIAG : Capable
    [   14.740000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
    [   14.750000] SPECTRAL : get_capability not registered
    [   14.760000] HAL_CAP_RADAR   : Capable
    [   14.760000] SPECTRAL : Need to fix the capablity check for SPECTRAL
    [   14.760000]  (spectral_attach : 236)
    [   14.770000] SPECTRAL : get_capability not registered
    [   14.770000] HAL_CAP_SPECTRAL_SCAN : Capable
    [   14.780000] SPECTRAL : get_tsf64 not registered
    [   14.780000] spectral_init_netlink 65 NULL SKB
    [   14.790000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT
    [   14.790000] SPECTRAL :----- module attached
    [   14.800000] Green-AP : Green-AP : Attached
    [   14.800000]
    [   14.810000] ath_get_caps[6169] rx chainmask mismatch actual 3 sc_chainmak 0
    [   14.820000] ath_get_caps[6144] tx chainmask mismatch actual 3 sc_chainmak 0
    [   14.830000] band steering initialized for direct attach hardware
    [   14.830000] ieee80211_bsteering_attach: Band steering initialized
    [   14.840000] ath_attach_dfs[12684] dfsdomain 2
    [   14.860000] SPECTRAL : module already attached
    [   14.860000] osif_wrap_attach:296 osif wrap attached
    [   14.870000] osif_wrap_devt_init:916 osif wrap dev table init done
    [   14.870000] ath_tx_paprd_init sc 85e48000 PAPRD disabled in HAL
    [   14.880000] wifi0: Atheros ???: mem=0xb8100000, irq=47
    [   14.890000] ath_pci: SmartAntenna-DRT-0.1 (Atheros/multi-bss)
    [   14.890000] ath_pci_probe
    [   14.900000] PCI device id is 003c :003c
    [   14.900000] ath_pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
    [   14.910000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
    [   14.920000] ath_pci 0000:00:00.0: ath DEBUG: sc=0x80648c00
    [   14.920000]
    [   14.920000]  ol_ath_pci_configure : num_desired MSI set to 0
    [   14.930000]
    [   14.930000]  Using PCI Legacy Interrupt
    [   15.940000] CE_per_engine_handler_adjust, base=80648c00 offset=00057400
    [   15.940000] CE_per_engine_handler_adjust, base=80648c00 offset=00057800
    [   15.960000] __ol_ath_attach: ath_attach TODO
    [   15.960000] __ol_ath_attach: dev name wifi1
    [   15.970000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
    [   15.980000]  OL_ACBKMinfree : 0
    [   15.980000]  OL_ACBEMinfree : 0
    [   15.980000]  OL_ACVIMinfree : 0
    [   15.990000]  OL_ACVOMinfree : 0
    [   15.990000] ol_ath_attach() BMI inited.
    [   16.000000] ol_ath_attach() BMI Get Target Info.
    [   16.000000] ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c
    [   16.010000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
    [   16.010000] ol_ath_attach() configure Target .
    [   16.020000] qc98xx_verify_checksum: flash checksum passed: 0x3d72
    [   16.020000] ol_transfer_bin_file 2342: Download Flash data len 2116
    [   16.030000]  Download AR9888v2_bin
    [   16.040000] ol_transfer_bin_file 2272: Download Firmware data len 235636
    [   17.040000] ol_ath_attach() Download FW.
    [   17.050000] ol_ath_attach() HT Create .
    [   17.050000] ol_ath_attach() HIF Claim.
    [   17.060000] ol_ath_attach() BMI Done.
    [   17.060000] ol_ath_attach() WMI attached. wmi_handle 85b70000
    [   17.070000] +HWT
    [   17.070000] SOC_RESET_CONTROL_ADDRESS : 800
    [   17.070000] CPU_INTR_ADDRESS = [2000000]
    [   17.080000] SOC_GLOBAL_RESET_ADDRESS = [0]
    [   17.080000] Rx_Filter : [0]
    [   17.080000] CE_per_engine_handler_adjust, base=80648c00 offset=00057400
    [   17.090000] CE_per_engine_handler_adjust, base=80648c00 offset=00057800
    [   17.100000] CE_per_engine_handler_adjust, base=80648c00 offset=00057c00
    [   17.100000] CE_per_engine_handler_adjust, base=80648c00 offset=00058000
    [   17.110000] CE_per_engine_handler_adjust, base=80648c00 offset=00058400
    [   17.120000] CE_per_engine_handler_adjust, base=80648c00 offset=00058800
    [   17.130000] CE_recv_buf_enqueue 653 Populate last entry 512 for CE 5
    [   17.130000] CE_recv_buf_enqueue 662 CE 5 wi 511 dest_ptr 0x7db560 nbytes 0 recv_ctxt 0x807d0240
    [   17.140000] Target:85d75000 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
    [   17.150000] -HWT
    [   17.150000] Target:85d75000 HTC Service:0x0300, ULpipe:4 DLpipe:5 id:1 Ready
    [   17.160000] HTC Service:0x0300 ep:1 TX flow control disabled
    [   17.170000] CE_pkt_dl_len_set CE 4 Pkt download length 64
    [   17.170000] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from 85670000
    [   17.180000] Target:85d75000 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
    [   17.190000] HTC Service:0x0100 ep:2 TX flow control disabled
    [   17.190000] wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event
    [   17.200000] num_rf_chain : 00000002
    [   17.200000] ht_cap_info: : 0000085b
    [   17.210000] vht_cap_info : 338001b2
    [   17.210000] vht_supp_mcs : 0000fffa
    [   17.210000] LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256, lteu_support 0
    [   17.220000] idx 0 req 1  num_units 0 num_unit_info 2 unit size 440 actual units 145
    [   17.230000] chunk 0 len 63800 requested ,ptr  0x5680000
    [   17.250000] FIRMWARE:P 145 V 16 T 443
    [   17.250000]
    [   17.250000] FIRMWARE:_wlan_rtt_enable
    [   17.260000] wmi_ready_event_rx:  WMI UNIFIED READY event
    [   17.260000] ol_ath_connect_htc() WMI is ready
    [   17.270000] ol_ath_set_host_app_area TODO
    [   17.270000] target uses HTT version 2.1; host uses 2.1
    [   17.280000] ol_ath_attach() connect HTC.
    [   17.290000] bypasswmi : 0
    [   17.290000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
    [   17.300000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
    [   17.310000] Skipping weather radar channel
    [   17.310000] Skipping weather radar channel
    [   17.320000] Skipping weather radar channel
    [   17.320000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
    [   17.330000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
    [   17.330000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
    [   17.340000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
    [   17.350000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
    [   17.360000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
    [   17.360000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
    [   17.370000] Skipping weather radar channel
    [   17.370000] Skipping weather radar channel
    [   17.380000] Skipping weather radar channel
    [   17.380000] Skipping weather radar channel
    [   17.390000] Skipping weather radar channel
    [   17.390000] Skipping weather radar channel
    [   17.400000] Skipping weather radar channel
    [   17.400000] Skipping weather radar channel
    [   17.400000] Skipping weather radar channel
    [   17.410000] Skipping weather radar channel
    [   17.410000] Skipping weather radar channel
    [   17.420000] Skipping weather radar channel
    [   17.420000] Add VHT80 channel: 5210
    [   17.420000] Add VHT80 channel: 5290
    [   17.430000] Add VHT80 channel: 5530
    [   17.430000] Add VHT80 channel: 5610
    [   17.430000] Skipping weather radar channel
    [   17.440000] Skipping weather radar channel
    [   17.440000] Skipping weather radar channel
    [   17.450000] Skipping VHT80 channel 5660
    [   17.450000] Skipping VHT80 channel 5680
    [   17.450000] Skipping VHT80 channel 5700
    [   17.460000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
    [   17.470000] Skipping weather radar channel
    [   17.470000] Skipping weather radar channel
    [   17.470000] Skipping weather radar channel
    [   17.480000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
    [   17.490000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
    [   17.490000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
    [   17.500000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
    [   17.510000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
    [   17.510000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
    [   17.520000] _ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
    [   17.530000] Skipping weather radar channel
    [   17.530000] Skipping weather radar channel
    [   17.540000] Skipping weather radar channel
    [   17.540000] Skipping weather radar channel
    [   17.550000] Skipping weather radar channel
    [   17.550000] Skipping weather radar channel
    [   17.550000] Skipping weather radar channel
    [   17.560000] Skipping weather radar channel
    [   17.560000] Skipping weather radar channel
    [   17.570000] Skipping weather radar channel
    [   17.570000] Skipping weather radar channel
    [   17.580000] Skipping weather radar channel
    [   17.580000] Add VHT80 channel: 5210
    [   17.580000] Add VHT80 channel: 5290
    [   17.590000] Add VHT80 channel: 5530
    [   17.590000] Add VHT80 channel: 5610
    [   17.590000] Skipping weather radar channel
    [   17.600000] Skipping weather radar channel
    [   17.600000] Skipping weather radar channel
    [   17.610000] Skipping VHT80 channel 5660
    [   17.610000] Skipping VHT80 channel 5680
    [   17.610000] Skipping VHT80 channel 5700
    [   17.620000] ol_ath_phyerr_attach: called
    [   17.620000] OL Resmgr Init-ed
    [   17.630000] ieee80211_bsteering_attach: Band steering initialized
    [   17.630000] ol_if_spectral_setup
    [   17.640000] SPECTRAL : get_capability not registered
    [   17.640000] HAL_CAP_PHYDIAG : Capable
    [   17.640000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
    [   17.650000] SPECTRAL : get_capability not registered
    [   17.660000] HAL_CAP_RADAR   : Capable
    [   17.660000] SPECTRAL : Need to fix the capablity check for SPECTRAL
    [   17.660000]  (spectral_attach : 236)
    [   17.670000] SPECTRAL : get_capability not registered
    [   17.680000] HAL_CAP_SPECTRAL_SCAN : Capable
    [   17.680000] SPECTRAL : get_tsf64 not registered
    [   17.690000] spectral_init_netlink 65 NULL SKB
    [   17.690000] Green-AP : Green-AP : Attached
    [   17.690000]
    [   17.700000] Green-AP : Attached
    [   17.700000] ol_if_dfs_setup: called
    [   17.700000] ol_if_dfs_attach: called; ptr=85691974, radar_info=85d71b00
    [   17.710000] ol_ath_rtt_meas_report_attach: called
    [   17.710000] ol_ath_attach() UMAC attach .
    [   17.720000] ol_if_dfs_configure: called
    [   17.720000] ol_if_dfs_configure: ETSI domain
    [   17.730000] ol_if_dfs_disable: called
    [   17.730000] ol_ath_attach: Calling ol_if_dfs_configure
    [   17.740000] osif_wrap_attach:296 osif wrap attached
    [   17.740000] osif_wrap_devt_init:916 osif wrap dev table init done
    [   17.750000] __ol_ath_attach: init tx/rx TODO
    [   17.750000] __ol_ath_attach: hard_header_len reservation 58
    [   17.760000] Initializing Pktlogs for 11ac
    [   17.770000] ath: exports duplicate symbol ath_rxbuf_alloc (owned by ath_dev)
    [   18.060000] [wifi1] FWLOG: [33390] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
    [   18.070000] [wifi1] FWLOG: [33390] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
    [   18.080000] [wifi1] FWLOG: [33390] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
    [   18.090000] [wifi1] FWLOG: [33390] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
    [   18.100000] [wifi1] FWLOG: [33396] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 )
    [   18.110000] [wifi1] FWLOG: [33396] WHAL_ERROR_RESET_PM (  )
    [   18.110000] [wifi1] FWLOG: [33403] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
    [   18.120000] [wifi1] FWLOG: [33894] ANI Enable:  1
    [   18.120000] [wifi1] FWLOG: [33901] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
    [   18.890000] Suspending Target - with disable_intr set :wifi1 (sc 80648c00)
    [   18.890000] waiting for target paused event from target :wifi1 (sc 80648c00)
    [   18.900000] osif_wrap_devt_detach:271 osif wrap dev table detached
    [   18.910000] osif_wrap_detach:328 osif wrap detached
    [   18.910000] __ol_ath_detach: init tx/rx cleanup TODO
    [   18.930000] ol_if_dfs_teardown: called
    [   18.930000] ol_ath_phyerr_detach: called
    [   18.930000] ieee80211_bsteering_detach: Band steering terminated
    [   18.940000] ieee80211_atf_detach: ATF terminated
    [   18.950000] CE_fini 2204 Cleaning up HTT Tx CE
    [   18.950000] CE_fini Cleaning up HTT MSG CE(5)
    [   18.960000] ol_if_spectral_detach
    [   18.960000] SPECTRAL : Module removed (spectral = 807ec000)
    [   18.970000] Green-AP : Green-AP : Detached
    [   18.970000]
    [   18.970000] Green-AP : Detached
    [   18.970000] ath_pci_warm_reset :(sc 80648c00)
    [   18.980000] Target Warm Reset
    [   18.980000] Host Intr Cause reg 0x900c : value : 0x4000
    [   18.990000] Target CPU Intr Cause 0x2005040
    [   19.090000] addr 0x4050 :  0x4
    [   19.110000] Target CPU Intr Cause after CE reset 0x2000040
    [   19.120000] RESET_CONTROL after cpu warm reset 0x800
    [   19.230000] Target Warm reset complete
    [   19.230000] ath_pci_remove
    [   19.230000] osif_wrap_devt_detach:271 osif wrap dev table detached
    [   19.240000] osif_wrap_detach:328 osif wrap detached
    [   19.310000] band steering terminated  for direct attach hardware
    [   19.320000] ieee80211_bsteering_detach: Band steering terminated
    [   19.320000] ieee80211_atf_detach: ATF terminated
    [   19.330000] SPECTRAL : Module removed (spectral = 878da000)
    [   19.340000] Green-AP : Green-AP : Detached
    [   19.340000]
    [   19.350000] Removing athdebug proc file
    [   19.360000] ath_dev: driver unloaded
    [   19.370000] ath_tx99: driver unloaded
    [   19.370000] ath_spectral: driver unloaded
    [   19.380000] ath_dfs: driver unloaded
    [   19.390000] ath_rate_atheros: driver unloaded
    [   19.400000] ath_hal: driver unloaded
    [   19.460000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
    [   19.500000] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
    [   19.710000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
    [   19.720000] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   19.790000] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
    [   19.800000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
    [   19.810000] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   19.880000] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
    [   19.890000] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
    [   19.900000] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
    [   19.920000] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
    [   19.970000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
    [   19.980000] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   20.050000] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
    [   20.060000] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 4bf0141e
    [   21.140000] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
    [   21.300000] ath9k: ath9k: Driver unloaded
    [   21.350000] ieee80211 phy2: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
    [   21.370000] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
    [   21.580000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
    [   21.590000] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   21.660000] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
    [   21.670000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
    [   21.680000] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   21.750000] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
    [   21.760000] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
    [   21.770000] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
    [   21.790000] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
    [   21.840000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
    [   21.850000] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   21.920000] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
    [   21.930000] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 4bf0141e
    [   23.010000] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
    [   26.340000] device eth0 entered promiscuous mode
    [   26.360000] device br-lan.13 entered promiscuous mode
    [   26.370000] device br-lan entered promiscuous mode
    [   26.760000] eth0: link up (1000Mbps/Full duplex)
    [   26.760000] br-lan: port 1(eth0) entered forwarding state
    [   26.770000] br-lan: port 1(eth0) entered forwarding state
    [   26.790000] br-lan13: port 1(br-lan.13) entered forwarding state
    [   26.790000] br-lan13: port 1(br-lan.13) entered forwarding state
    [   28.770000] br-lan: port 1(eth0) entered forwarding state
    [   28.790000] br-lan13: port 1(br-lan.13) entered forwarding state
    [   70.490000] random: nonblocking pool is initialized
    [  131.950000] br-lan13: port 1(br-lan.13) entered disabled state
    [  131.980000] device br-lan.13 left promiscuous mode
    [  131.980000] device br-lan left promiscuous mode
    [  131.980000] br-lan13: port 1(br-lan.13) entered disabled state
    [  352.450000] device br-lan.13 entered promiscuous mode
    [  352.460000] device br-lan entered promiscuous mode
    [  352.480000] br-lan13: port 1(br-lan.13) entered forwarding state
    [  352.480000] br-lan13: port 1(br-lan.13) entered forwarding state
    [  354.480000] br-lan13: port 1(br-lan.13) entered forwarding state
    [  458.230000] br-lan13: port 1(br-lan.13) entered disabled state
    [  458.250000] device br-lan.13 left promiscuous mode
    [  458.250000] device br-lan left promiscuous mode
    [  458.250000] br-lan13: port 1(br-lan.13) entered disabled state
    

    Ich glaube die Zeile hier gibt die aktuelle Firmware des APs an:

    firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258

    auf der UTM im verzeichnis: /etc/wireless/firmware

    hat der AP55 eine Firmware (.devinfo) von:

    DEVICE_TYPE=AP55
    FIRMWARE_VERSION=9500-wifi-94a8ad46-0df51d6
    QCA_VERSION=c3496dd
    FIRMWARE_LENGTH=7288212
    FIRMWARE_TAG=apfw_11.0.017
    

    D.h. ich vermute da läuft was schief beim Firmware Update meiner APs. Das Flashtool funktioniert leider nicht.
    Ich habe einen separaten USB-Nic angeschlossen über den der AP mit meinem Laptop verbunden ist, leider kommt es immer zur folgenden Fehlermeldung:

    Kann mir bitte jemand helfen die UTM dazu zu bewegen meine APs zu aktualisieren?

    Dank und Gruss

  • Halo  ,

    basierend auf den Protokollen sieht es so aus, als wäre der Zugangspunkt gemauert, ich würde vorschlagen, den Zugangspunkt mit Hilfe des folgenden KBA erneut zu flashen - https://support.sophos.com/support/s/article/KB-000039314?language=en_US

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • Hi Vivek!

    Since machine translation to german is very unprecise and requires fantasy to understand what you mean:
    I'll continue in english.

    About your recommendation: I already tried that. See the screenshot of the error message in my last post.
    It occurs every time i use the flashing tool.

    My understanding is: the AP is in the wrong mode to do that.

    Quote:

    "The Sophos Flashing Tool will only work if the boot loader cannot load the access point firmware image. If the firmware can be booted or the bootloader is damaged, this tool will not work."

    The AP boots and the tool wont work.

  • Okay so is it that the AP continuously reboots ?

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • No, the ap boots and works to some degree:
    The old firmware is causing clients to disconnect very often.


    Its connected to the UTM and shows up as active ap:

    For some reason its not getting updated by the utm. if you look a little up there is a post from balfson that i am facing a bug that has been patched 5 years ago:
    [...]

    Hmmm, reason_code="2" was a bug fixed almost 5 years ago - what version are you using?

    [...]

  • Did we try re-configuring the AP from the scratch and changing auto channel to manual ?

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • No, we did not.
    Do you think this will resolve the firmware issue?
    I personally don't have that feeling, but i may be wrong.

  • I would suggest to try once and let me know the status once done !

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • Can you describe the procedure to me?
    Not sure how to get it back to scratch.
    Can you confirm i did find the firmware version in the console log?

    firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258

  • Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

Reply Children