This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Which Access Point?

Hi

I am looking to roll out Sophos AP's accross 3 sites over the next 2 weeks. However I am not sure which model I need. I can't seem to find any threads on google where somebody has recommended a specific product.

Currently we have:

Site 1 (2 floors / 45 users) 2 x Draytek Vigor AP900

Site 2 (2 floors / 10 users) 1 x Draytek Vigor AP900

Site 3 (1 floor / 10 users) 1 x Draytek Vigor AP900

The signal strength of these models work perfectly for what we need at each site. What would be the nearest Sophos match for this? The most important change I am looking to get out of this is fully segregated wi-fi. Where no wi-fi traffic reaches the production network, all wi-fi users simply gain internet access only. So please don't recommend any models that won't support that.

Thankyou!



This thread was automatically locked due to age.
Parents
  • Hi Ben,

     

    Thank you for reaching out to Sophos .

    You choose AP55 or AP100 for the deployment .  Both are complaint with 802.11AC & 802.11bgn standards .

    If you are looking at an exact match of the AP that you are using I'd suggest AP55 .

    If the majority of WLAN client devices in your network are 3 spatial stream capable (3x3:3),please choose AP100.

     

    Regards,

    Senthil

Reply
  • Hi Ben,

     

    Thank you for reaching out to Sophos .

    You choose AP55 or AP100 for the deployment .  Both are complaint with 802.11AC & 802.11bgn standards .

    If you are looking at an exact match of the AP that you are using I'd suggest AP55 .

    If the majority of WLAN client devices in your network are 3 spatial stream capable (3x3:3),please choose AP100.

     

    Regards,

    Senthil

Children