This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSID modification not applied

Hi,

I have created a simple SSID without encryption and applied it to my 2 APs. I was able to connect clients and it worked fine.

After that, I decided to modify the SSID by adding WPA2/Personal encryption. The AP were in a updating mode when I was looking at Wireless dashboard. Now they are "up-to-date" but are still emitting the SSID with "no encryption" security.

A long delay is required or is this a bug ?

the firmware version for AP is still 0.9.



This thread was automatically locked due to age.
Parents Reply Children
No Data