This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless Open Port

Hello all,

 

I am trying to have a connection between a computer and a device over the Wifi Network with no success.

I have made a wireless network with client isolation OFF.

For successful connection between those two devices tcp port 10080 and udp 1024 and 8010 must be open.

The devices are connected to wireless network of the SG115w through an AP30.

What should i do in order to have successful communication?

 

Best Regards



This thread was automatically locked due to age.
Parents Reply
  • Hello  

    thank you for your reply

     

    i tried tcpdump before no traffic between the device and the pc.

    But i recently found out something else

    The device with IP 192.168.3.52 sends to Link Local address for some reason.

     

    11:50:36.405426 In 98:8b:ad:20:b7:9f ethertype IPv4 (0x0800), length 66: 192.168.3.52.39508 > 169.254.14.95.10080: Flags [S], seq 788390100, win 8192, options [mss 1460,nop,nop,nop,eol], length 0

    I did arp -a both on pc and router everything seems ordinary

Children
  • Hi  

    If the TCPDUMP says that packets were sent to an APIPA IP, then there's no issue with the UTM. You may try to install Wireshark on your machine and check which destination IP address the traffic is sent to. 

    Regards

    Jaydeep

  • Hi  

    I tried the device and the same PC on a different network with different router and it worked instantly. Same settings on PC, no changes.

    I have wireshark on the PC and it captures packets from the Device IP for example when i ping it but not when i try to connect the Device with the PC (i am expecting to see packets coming from Device to PC on TCP port 10080 and UDP 1024 and 8010).

     

    Best Regards

  • Hi  

    It's interesting that the device is able to send out packets to correct IP address when in other network but not when connected with AP30. I recommend creating a case with Sophos Support as it's important to check the packet flow and how it is handled by the Sophos UTM. I'd suggest you check the PING from the device to the PC and vice versa. It should give an idea of where it's getting dropped. Please let me know the case ID once you've created.

    Regards

    Jaydeep