Thread Info
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How do can I use remote desktop on two or three different ports/subnets on my network?

PcDoc

I have 4 NICs and three have been configure for different networks (IP range and subnet) but I can not use RDP to access from one network to the other.  What am I missing?  I have tried creating a rule but obviously did something wrong.



This thread was automatically locked due to age.
  • 0
    Did you use different ports in the NAT for each network?

    Ian

    XGS118 - v21.0.1 MR1

    XG115 converted to software licence v21.0.1 MR-1

    If a post solves your question please use the 'Verify Answer' button.

    • 0 in reply to rfcat_vk
      Yes, everything is on different ports.
      • 0 in reply to PcDoc

        I missed the bit about internal networks. You will need a f/w rule allowing traffic between networks. You would only need different ports or a different external address if trying to access them from external/

        Ian

        I should be saying policies in line with SF-OS not a UTM

        XGS118 - v21.0.1 MR1

        XG115 converted to software licence v21.0.1 MR-1

        If a post solves your question please use the 'Verify Answer' button.

    • 0
      Can you paste a Print Screen of the rule you created may be that should help us get an idea
      Unfiltered HTML