Change Zones From CLI

Hi Kamel,

Thank you for reaching out to Sophos Community.

Can you try to enable appliance access if this will let you access the GUI by enabling WAN access?

system appliance_access enable

Note: This will cause a network interruption, override the configured Appliance Access, and allow access to all the services.

•  Sophos Firewall: What to do when the Web Admin is not accessible 

Hello Erick,
Thanks for your reply.

The problem is that I need to change the zone from LAN to WAN and WAN to LAN, so even if I enabled access from all ports, it will not work because if I added the WAN IP to the LAN port, I still can't access it from this port as it's the wrong zone type. 

all I need to do is reverse Wan to Lan or Lan to Wan,
If there is any way to do it from the CLI, it will resolve my issue.

Thank you.

Hello Erick,
Thanks for your reply.

The problem is that I need to change the zone from LAN to WAN and WAN to LAN, so even if I enabled access from all ports, it will not work because if I added the WAN IP to the LAN port, I still can't access it from this port as it's the wrong zone type. 

all I need to do is reverse Wan to Lan or Lan to Wan,
If there is any way to do it from the CLI, it will resolve my issue.

Thank you.

There is not a way to change this, as we do not allow default password (admin) on the WAN. 

Can you setup an device to access the SFOS appliance via LAN?