Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.
Hi,
below diagram right now we have one firewall and one core connectivity we need to change to active passive mode
i have some query regarding configuration.
switch to firewall A1,A2 port will connect what i need to configure in firewall ports.
both switch are in active active mode.
Thanks
Satya
Hello Satya,
You may follow the configuration and requirements for A/P here: https://docs.sophos.com/nsg/sophos-firewall/21.0/help/en-us/webhelp/onlinehelp/HighAvailablityStartupGuide/HAConfiguration/HAQuickHAConfigureActivePassive/index.html
Kindly follow the configuration guide on the doc for the Primary device (active) and for the Auxillary device (Passive)
I believe once you build the HA, there should be no further configuration needed here for the Passive device.
Kindly take note to perform the configuration activity on window hours
You may also get in touch with your local Sophos Sales Engineer or Sophos Partner should you need further details on the implementation.
Hope this helps.
Regards,
Raphael Alganes
Community Support Engineer | Sophos Technical Support
Sophos Support Videos | Product Documentation | @SophosSupport | Sign up for SMS Alerts
If a post solves your question use the 'Verify Answer' link.
all KB article i read but not found my answer why you guys always advise for kb article.
Question-
1.below topology in dell 5248f multiple uplink port connected to firewall A1 and A2 .in switch i created 2 port channel what i need to configure in A1,A2.(need to LAG)
2.A1,A2 port are connected to Lan network if primary IP address of firewall is 192.168.30.1 what will be the secondary firewall ip address.(SAME IP OR DIFFERNET)
3.how to access gui and cli of firewall from LAN.(which ip address will use)
