Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 2243 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ROUTING TRAFFIC TO A DESTINATION VIA A SPECIFIC WAN INTERFACE [SD-WAN ROUTING]

Abdurrahman Mubi

Hi All,

Scenario:

  • XGS 136 firewall with two WAN links [Wan1 and Wan2]
  • Server/URL on the Internet that has a static IP [x.x.x.x]
  • Single LAN for the internal users

Requirement:

  • LAN users to use WAN1 for general Internet traffic 
  • LAN users to use WAN2 when the destination is x.x.x.x

Configuration:

  • Specified x.x.x.x as an IP host via Host and Services
  • Created an SD WAN Route policy stating that traffic from any incoming interface or source network with destination network as the IP host should use the Primary/Backup gateway link selection settings. 
  • Link selection setting specifies WAN2 as the primary gateway and backup gateway as none.

The above configuration does not appear to work despite this. Can anyone tell me what I might be missing?



This thread was automatically locked due to age.
Unfiltered HTML