This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to explain this log?

Hi,

I have rule 5. It's a DNAT from the WAN IP 188.175.113.182 in to the network to the VoIP server.

RULE 5

If I look in the LOG, I see the following:

The first line does correspond to rule 5, but what do the other lines mean? They are also marked as belonging to rule 5 but they don't match the conditions at all. And status is ALLOWED?

Thank you.

This thread was automatically locked due to age.

0 LuCar Toni over 2 years ago

Is this the SIP Helper? Because this looks like SIP.

__________________________________________________________________________________________________________________
- 0 Michal Talman CZ over 2 years ago in reply to LuCar Toni
  
  I don't know, how do I know?
  - 0 LuCar Toni over 2 years ago in reply to Michal Talman CZ
    
    Show a Mouseover of such allowed Rule.
    
    __________________________________________________________________________________________________________________
  - 0 Michal Talman CZ over 2 years ago in reply to LuCar Toni
  - 0 LuCar Toni over 2 years ago in reply to Michal Talman CZ
    
    We are not flagging the Master_ID on this screen.
    
    Could you go to the Console (Advanced shell) - Do a:
    
    Conntrack -L | grep fwid=5
    
    Then check the Entries for a: masterid=
    
    Is this 0 or a number?
    
    __________________________________________________________________________________________________________________
  - 0 Michal Talman CZ over 2 years ago in reply to LuCar Toni
    
    Yes, masterid=0 ... and what else?