Kindly help, I can not access my xg firewall but the ip is responding to ping
This thread was automatically locked due to age.
Kindly help, I can not access my xg firewall but the ip is responding to ping
Hi,
because you have not configured the XG yet, you might find that you are trying to connect to the a non configured port, try swapping to other ports.
You have advised you can access the console, please review the network configuration shown.
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Hello,
What was the output of the following:
if the GUI is still inaccessible, verify the configured destination port used for HTTPS GUI access using the following command: psql -U nobody -d corporate -c "select destinationport from tbllocalservicedetails WHERE localserviceid =2"
p.s You run this one from the Advanced Shell not the console
I will try the command then give an update.
How do I get to the advance shell since it is only accessible via console?
Youu advised you had console access in an earlier post in this thread.
Nowhere have you mentioned you have restarted your XG from a total power off.
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Please post a copy of the login to the console screen you are seeing, you appear to be missing or using the wrong menu item?
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
rfcat_vk I'm not physically in the location where the device is but here is the screen after login via console