Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 5612 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fail to install Sophos XG (Home Edition)

eatable2688

Hello,

I'm trying my best to boot the installer of Sophos XG Home Edition version SW-19.5.0_GA-197.iso from a 8GB USB 2.0 stick on my Intel i3-1115G4 CPU with 8 GB RAM but can't seem to find a way to properly boot the Installer

I tried Etcher on MacOS and Rufus in ISO and DD mode on Windows 10. None of them did a difference

I read about the BIOS Legacy boot mode, but the GRUB loader only seems to boot while on UEFI. Did some tests with the CSM settings. Whatever I do, the USB stick isn't recognized while using Legacy setting

Here's some of my BIOS settings :


The only thing in CSM I kept UEFI is the Video since the HDMI signal isn't working in Legacy mode

Is there anything you could tell to help me navigate in this difficulties?

Thanks in advance and regards!



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to eatable2688

    Neither product however (XG or UTM) supports UEFI and it WILL fail.  What exactly is the issue you are having?  Can you give a screenshot of the error? What hardware is this on?  A NUC?  Custom built PC? Some hardware won't even allow XG or UTM to install right.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Hi

    The hardware is a fanless PC with these specs : 

    It’s hard to document the problem since it’s often a black screen with and without an underscore, that’s all

    When the BIOS settings allow the GRUB boot, the boot goes to "SFOS INSTALLER" ans stuck there

    I wish it can be useful for you! Thanks

  • 0 in reply to eatable2688

    further issue, those i225 nics are not supported, neither are i219 nor i226 series.

    Ian

    XG115W - v20.0.3 MR-3 - on holiday

    XGS118 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to eatable2688

    The NIC in that wont work as well, you will see a lot of UP/DOWN problems and not keep a connection.

    It's a UEFI Bios so you will most likely not get this installed right.

    Something you could possibly do to make this work is throw Proxmox on it, then install XG as s VM there, but this being your base firewall hardware will be a nightmare.

    Another option would be installing something like PFSense.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Ohh ok, that’s sad. I really liked the OS and GUI here

    Will then go with OPNsense that just work out of the box Slight smile

    Thanks for the infos you two!

Unfiltered HTML