https://community.sophos.com/sophos-xg-firewall/b/blog/posts/sophos-firewall-v19-mr1-is-now-available
Release Notes: https://docs.sophos.com/releasenotes/output/en-us/nsg/sf_190_rn.html
"Old" V18.5 MR4 Thread: https://community.sophos.com/sophos-xg-firewall/f/discussions/134965/sophos-firewall-v18-5-mr4-feedback-and-experiences
V19.0 GA Thread: https://community.sophos.com/sophos-xg-firewall/f/discussions/134009/sophos-firewall-v19-0-ga-feedback-and-experiences
See KIL:
Fall into the same "trap".
After the recent change of SSLVPN in V19.0, you need to specify the subnet range correctly.
See: https://community.sophos.com/sophos-xg-firewall/f/recommended-reads…
I am not sure, if IMAP will alter the Header or not. Do you see any entries in the affected Logs?
__________________________________________________________________________________________________________________
Anyone else experience issues uploading the v19 MR1 firmware on VMWare? Running v19 GA but the 19 MR1 will not upload into the empty slot. The "spinning wheel" on the upload screen starts for a few seconds, then just stops. On another occasion as soon as the upload started it went straight back to the login screen. Tried rebooting the firewall but still the same.
Firewall was originally built from the 19 GA OVA template, and VI-19.0.1_MR-1.VMW-350.sig is what i am trying to upload.
Which browser did you use? Did you try upload&Boot?
Have tried several, Chrome, Safari, Edge - all the same. Yes tried upload and boot but just doesn't work.
Check the /log/applog.log at the time you upload for an indication.
Only thing i'm getting within the upload time period is the following in that log
Jul 26 09:42:13Z apiInterface:: Deleting Entity and Event for legacy mode base operationJul 26 09:42:13Z Request type = 1Jul 26 09:42:13Z apiInterface:versionsupported: true.Jul 26 09:42:13Z apiInterface:request mode -> 1644.Jul 26 09:42:13Z apiInterface:Current ver :::'1900.1' Jul 26 09:42:13Z apiInterface:entityjson::::::::HASH(0xb0275c0)Jul 26 09:42:13Z Info:: Transaction will not be rolled back for opcode u2d_get_fw_info. If any operation fails, request is part of multiple request :
When I open Global SSL VPN settings, and change nothing, I get this.
Canot figure out what is missing?
-----
Best regardsMartin
Sophos XGS 2100 @ Home | Sophos v19 Architect
See: https://community.sophos.com/sophos-xg-firewall/f/recommended-reads/132121/ssl-vpn-ipv4-lease-range-changes-in-sfos-v19
Because likely your network above in the SSLVPN Range is not a range IP, instead it is a IP. Change it to .0, and you can save.
Confirmed - it worked :-)
Ok so spun up another VM with a fresh 19 GA build from the OVA template, and 19 MR1 imported fine. Will flatten my production build later and start from fresh. Hopefully that will sort it. Cheers.