Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 39 subscribers
  • Views 3078 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PXE Boot and WDS Server

Ben@Network

Hello Community,

I used this thread to configure the PXE Boot to a Windows WDS Server: PXE Boot DONE! - Discussions - Sophos (XG) Firewall - Sophos Community

The Client is requesting the boot file but there a strange characters at the end of the filename if I check this with tcpdump:

17:48:38.295584 xfrm1, OUT: IP 192.168.130.101.1451 > 192.168.168.10.69: 50 RRQ "boot\x64\wdsnbp.comM-^?" octet tsize 0 blksize 1468
17:48:38.321928 xfrm1, IN: IP 192.168.168.10.69 > 192.168.130.101.1451: 38 ERROR ENOTFOUND "The specified file was not found."

Has anybody an idea how I can remove the charaters? If I use a normal TFTP Client I can download the file from the server. 

On the XG 18.5.1 I use these settings for DHCP:

system dhcp dhcp-options binding add dhcpname LAN-DHCP optionname Bootfile_Name(67) value 'boot\x64\wdsnbp.com'

system dhcp dhcp-options binding add dhcpname LAN-DHCP optionname TFTP_Server_Name(66) value 192.168.168.10

Thanks, 

Ben



This thread was automatically locked due to age.
Parents
  • +1

    Now I have a running setup:

    With a IPSec Tunnel (XFRM) this setup is not working. I switched to a RED-Tunnel with OSPF (I think it should work also with RED and static Routes). I removed the options 66 and 67 and set the Option 60:

    system dhcp dhcp-options binding add dhcpname LAN-DHCP optionname Vendor_Class_Identifier(60) value PXEClient

    I setup this NAT Rule for the WDS Server in a Remote Location. Port 4011/UDP is natted from the local Interface to the WDS-Server:

    And this Firewall Rule:

    Ben

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • +1

    Now I have a running setup:

    With a IPSec Tunnel (XFRM) this setup is not working. I switched to a RED-Tunnel with OSPF (I think it should work also with RED and static Routes). I removed the options 66 and 67 and set the Option 60:

    system dhcp dhcp-options binding add dhcpname LAN-DHCP optionname Vendor_Class_Identifier(60) value PXEClient

    I setup this NAT Rule for the WDS Server in a Remote Location. Port 4011/UDP is natted from the local Interface to the WDS-Server:

    And this Firewall Rule:

    Ben

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML