Thread Info
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DHCP For Vlans with layer3 DHCP Relay

pawan tiwari

Hello Everyone

i have 4 vlan created in my layer3(ip-172.16.1.2) which is directly connected to Lan port of My XG Firewall

Dhcp relay Enable on Layer3 and relay server ip address is Lan port of firewall (172.16.1.1)

vlan 1 - 172.16.10.1/22

Vlan 2- 172.16.20.1/22

vlan 3- 172.16.30.1/24

Vlan 4- 172.16.40.1/22

i tried many type of rules, Service,  vlan port and scope  to assign vlan ip via dhcp or dhcp relay but its fail.

Firewall communicating with switches but did provided ip for vlan users.

Firewall and edge switch are connected with trunk (Permit all).

Please suggest me exact what i have configure in sophos, Lan Switching is ok. 



This thread was automatically locked due to age.
  • +1

    Hello

    Have you also added VLAN interface on XG LAN Port and configured DHCP for each VLAN?

    Screenshot of your interface configuration and DHCP configuration would help here.

    Regards,
    Hardik R