Sophos Central customers have reported issues preventing successful installation, live terminal and device list access issues in the EU-CENTRAL-1 region For more info refer to KBA-000041338 for the latest updates.

Thread Info
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How delete a route using cli with XG?

Julian Cast

Hello,

i have a big problem, i lost the connection on a site just after adding a bad route in the configuration. Now i can't use the GUI interface , i have constantly the message "Unable to load page. Check your network connection", i can't see the routing option. 

I can go in the FW using SSH, i tried the command mroute show but nothing is displayed (i'm connected by teamviewer on a computer).

Can you help me to see the route and delete it over CLI please?

What i added before lost connection : (route to RED) 

Thank you !



This thread was automatically locked due to age.
  • 0

    Did you register Central Management? 

    This would give you a SSO Login to your Appliance.

    Anyways. You should move to the Advanced Shell (5 - 3). 

    Try to use some basic common linux commands: https://www.linuxtechi.com/add-delete-static-route-linux-ip-command/

    If those work, access the webadmin and remove the router. Would highly recommend to reboot the appliance afterwards. 

    __________________________________________________________________________________________________________________

    • FormerMember
      0 FormerMember

      Hi Julian Cast,

      Thank you for reaching out to the Community! 

      I tried to configure a dummy static route on my LAB firewall as per the screenshot below: 

      console> system diagnostics utilities route runconfig-show
      Kernel IP routing table
      Destination Gateway Genmask Flags Metric Ref Use Iface
      10.81.235.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
      10.255.0.0 0.0.0.0 255.255.255.0 U 0 0 0 GuestAP
      172.16.19.0 0.0.0.0 255.255.255.0 U 0 0 0 PortA
      172.16.19.11 192.168.1.1 255.255.255.255 UGH 0 0 0 PortB
      192.168.1.0 0.0.0.0

      I was able to delet the route by running the following command: route delete -net 172.16.19.11 gw 192.168.1.1 netmask 255.255.255.255 dev PortB


      SFVUNL_VM01_SFOS 17.5.14 MR-14-1# route delete -net 172.16.19.11 gw 192.168.1.1 netmask 255.255.255.255 dev PortB

      console> system diagnostics utilities route runconfig-show
      Kernel IP routing table
      Destination Gateway Genmask Flags Metric Ref Use Iface
      10.81.235.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
      10.255.0.0 0.0.0.0 255.255.255.0 U 0 0 0 GuestAP
      172.16.19.0 0.0.0.0 255.255.255.0 U 0 0 0 PortA
      192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 PortB

      Thanks,

      • 0 in reply to FormerMember

        Hi! 

        I was finaly able to delete the route using web interface by disabling the red connection from UTM. I found your solution after this process. I keep you information in my database because it will be very usefull for me ! 

        Thank you for your internal test

        Thank you for your research? 

        Thank you and good sunday !