Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG210 drop rule affecting outside of firewall

Hello, we have /25 network in a datacenter, 
there is only one routing at top but below that there is no routing as images.

both sonic wall and juniper is running as transparent mode and running in/out firewall rules.

 In this, we are trying add Sophos XG 210 as below,

we are setting up XG210 in transparent(bridge mode) too,
however, as we added XG210 to network, XG210's WAN to LAN rules are
affecting to servers under sonic wall or juniper.

For example, we put 80/tcp drop rule to XG210 since we don't have
Web server under XG210, but we have one under Juniper.
As we add XG210, Sophos blocks 80/tcp under Juniper.

Why XG210 affecting outside of servers itself?



This thread was automatically locked due to age.
  • Hi,

    the issue will be your XG wantolan rules, at this stage you should only have lan to wan rules. Also there is apoosibility that you have the wrong mask on the XG wan interface?
    ian

    XG115W - v20.0.3 MR-3 - on holiday

    XGS118 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.