Thread Info
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

It is possible to isolate an ip (device) by a firewall rule?

Miguel Cruz

Hi, i have a router (tp-link) that doesnt have the wifi isolation option, i use this for "guest" so it is conected to the xg firewall through the same lan port that is my main swich, so i would like to know if its possible to block some functions like "access to network devices" or "list network devices" including my main router.

 

main router: 192.168.110.1

guest router: 192.168.1.1 (wan: 192.168.110.10 / 255.255.255.0, dhcp 192.168.1.100-199)

 

Thanks!

 

7701.screencapture-192-168-110-3-4444-webconsole-webpages-index-jsp-2019-06-04-11_43_00.pdf



This thread was automatically locked due to age.
  • FormerMember
    0 FormerMember

    Hi  

    Why don't you connect this router that you use as "Guest network" access on a different port/network on the XG and define it as a DMZ or other zone?

    From there, you could configure a firewall rule to configure access per your requirements.