Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 6 subscribers
  • Views 2875 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Legacy USB support

Steve Ju

How do we enable the Legacy USB Support?  We have a workstation that got shutdown improperly and now it has the Windows repair on bootup.  The keyboard does not function to allow me to select boot up Windows normally.  I tried to hit SHIFT-F3 but it does not enable the Legacy USB support.  We have Sophos Safeguard 7.0.  Any help is greatly appreciated.  I really don't want to reimage a PC each time because of this.



This thread was automatically locked due to age.
  • 0

    Hi - although this was/is a Sophos SafeGuard setting, it can also be one particular to the PC. In the BIOS you may see it in Advanced (like below) but it differs in every BIOS and version.

    You may see it as simply USB Keyboard support too - again PC dependant!

    I know it's not a good solution but I always have a PS2 keyboard to hand when USB goes wrong as it sometimes can - especially at or before POST. Of course not many PC's have PS2 sockets now though... :(

     

Unfiltered HTML