Remove IP config from PHYs with VLAN interfaces

Question

Is it possible to remove the mandatory IP configuration from PHY interfaces that happen to have VLAN interfaces? Most scenarios using VLANs will not use VLAN1 and therefore will not need IP services on the root PHY but the XG will not let it be configured without v4\v6 configured - adds to confusion and is a waste.

This thread was automatically locked due to age.

LuCar Toni · Answer

Unfortunately it is not. Still working on it. 
 In the current build, you can use a "Dummy" Zone and give it a DHCP IP or give it a not present IP in your Network. 
 https://ideas.sophos.com/forums/330219-xg-firewall/suggestions/10759326-allow-interface-port-to-be-configured-with-just-vl 
 Cheers