Staff Wireless and access to internal resources

Question

Running the latest UTM on a Hyper V with no VLANS and a fairly simple setup. 
 We have an internal network running in transparnet filtering mode with a Wireless network bridged to it. This works well except for the constant need to authenticate on the wireless devices. So I am looking at setting up a Staff Wireless network on a seperate zone so that I can apply a single base filtering policy. So I have set up the wireless ccordinbg to Next Steps for Separate Zone Networks in the manual. This also works fine but they cannot access internal resources. I would like then to be able to access some internal resources such as the intranet and other content that is only accessible internally. 
 Is this doable?

sachingurung · Answer

Hi Alleyns, 
 Try this, configure a wireless network host with separate zone defined for the Staff. In the DHCP settings for wireless interface, define DNS as UTM'S IP address. Finally, configure a static DNS entry for intranet and other contents. 
 Thanks

TedChen-Sophos · Answer

I got it working.. I believe they've made bug fixes so it didn't take as much work as I've read on other threads. Basically, I set Ethernet to Ethernet Bridge and checked the box for both the Ethernet and Wireless interfaces. Then, I needed to allow NetBIOS via the firewall internally between the 2 interfaces and whatever other ports that showed up on the log as being dropped on the intranet.