This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Staff Wireless and access to internal resources

Running the latest UTM on a Hyper V with no VLANS and a fairly simple setup.

We have an internal network running in transparnet filtering mode with a Wireless network bridged to it.  This works well except for the constant need to authenticate on the wireless devices. So I am looking at setting up a Staff Wireless network on a seperate zone so that I can apply a single base filtering policy.  So I have set up the wireless ccordinbg to Next Steps for Separate Zone Networks in the manual.  This also works fine but they cannot access internal resources.  I would like then to be able to access some internal resources such as the intranet and other content that is only accessible internally. 

Is this doable? 



This thread was automatically locked due to age.
Parents
  • Under Network Services / DNS put your new created internal WLAN to the allowed networks for DNS-Requests.

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Reply
  • Under Network Services / DNS put your new created internal WLAN to the allowed networks for DNS-Requests.

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Children
No Data