Can I upgrade Ram SG125 ?

Adam Jinanar If your device meets the criteria above (below?) why not just open it to see what the current memory type is.  According to one wiki I found, the unit uses a atom C2358 cpu.  Per the intel spec page below that should be good for up to 16GB of ddr3 1333mhz ram. It's not specified if its sodimm or regular dimm.

https://www.intel.com/content/www/us/en/products/sku/77978/intel-atom-processor-c2358-1m-cache-1-70-ghz/specifications.html

http://en.techinfodepot.shoutwiki.com/wiki/Sophos_SG_125_rev_2

There is RAM specialist vendor who lists modules and specifications datasheets for each per SG model and Revision phs-memory.com / speicher.de Sorry no deeplinks, see BAlfons' remark on ths

They specify as follows, so we probably do not need to open our boxes. However if you do, it would be interesting to know if they have two modules with 2GB or one module with 4GB.

Rev.2 has the following specs:

Device - Specifications

Computer memory - info

whereas the

Rev.3 has the following specs:

Device - Specifications

Computer memory - info

Firewall's are pretty premative when it comes to speciality stuff. I used to run a pfSense firewall at home on a M400 and prior on the other older WatchGuard stuff, I even got another off brand built in Canada by some company and its hardware was similar. In the end for my home (not my office that uses Sophos) I ended up getting a Unifi UDM-Pro. Since Unifi is made of ex-Apple networking folks you can probably understand their hardware is all speciality stuff! LOL

My point is you are best to go with the recommend and not try to go off the rails too much, adding ECC would be an off the rails thing.

I found this older document for technical specs:

2015 sophos-xg-sg-all-models-tech-specs.pdf

I can tell from my own experience after upgrading an older model SG105 rev.1: this device has a single SO-DIMM in DDR3 technology.

So I ordered a Kingston 8GB DDR3-1600MHZ (KCP3L16SD8/8) to replace the original 2 GB, worked perfectly.
This is now our "Lab" firewall to play around with.

I will do some testing with the Rev. 3 and order Crucial RAM 8GB DDR4 3200MHz CL22 CT8G4DFRA32A 

It is a 3200Mhz Module, but should be backward compatible with 2400Mhz. I wish I had some ECC modules lying around to test, but I am not buying them on chance.

Can anyone verify that on the SG125 Rev 3 it is a Intel Atom C3508 or can tell me if lshw or hwinfo are installed on the UTM for command line?

If it is a Intel Atom C3508 it would even be only DDR 1866Mhz

Both utilities exist.

Robert Danzig said:

Can anyone verify that on the SG125 Rev 3 it is a Intel Atom C3508 or can tell me if lshw or hwinfo are installed on the UTM for command line?

If it is a Intel Atom C3508 it would even be only DDR 1866Mhz

Enable SSH in the UTM and do the following:

• From the Webadmin navigate to Management > System Settings > Shell Access section and enable the shell.
• Login to the UTM shell using Putty or another SSH client.
• Set passwords for both loginuser and root users.
• Login to the shell using the loginuser name.
• Use the su -- to change to root.
• From root execute the following commands: 
  • cat /proc/cpuinfo (this confirms the number of installed CPUs). 
• the output will show the the CPU model
• 

Thank you, yes I know, but not really my area. Anyway I did it our of curiosity.

So the RAM indeed is only clocked at 1866Mhz in alignment with the Atom C3508 at 1600Mhz. So the older 2400Mhz modules does make sense.

Today I installed Crucial RAM 8GB DDR4 3200MHz CL22 CT8G4DFRA32A for the SG125 Rev3 ( According to "lshw -short -C memory" it has DDR4 and clocks them only at 1866Mhz as stated above) and it seems that it just works fine as expected.

Actually 3200Mhz module was cheaper than older DDR4 2400Mhz modules and they are better than the old specs, but if needed can re-used them somewhere else.

If somebody does tests with ECC modules please let us know. It would be interesting and so much in line with a 24/7 Firewall/server style and supported by the Atom C3508.

So hopefully no more swapping or memory warnings.

Thank you for your support everybody alan weir  Jay Jay PhilippRusch BAlfson 

Great to hear that this works!

Great to hear that this works!