Can I upgrade Ram SG125 ?

Adam Jinanar If your device meets the criteria above (below?) why not just open it to see what the current memory type is.  According to one wiki I found, the unit uses a atom C2358 cpu.  Per the intel spec page below that should be good for up to 16GB of ddr3 1333mhz ram. It's not specified if its sodimm or regular dimm.

https://www.intel.com/content/www/us/en/products/sku/77978/intel-atom-processor-c2358-1m-cache-1-70-ghz/specifications.html

http://en.techinfodepot.shoutwiki.com/wiki/Sophos_SG_125_rev_2

There is RAM specialist vendor who lists modules and specifications datasheets for each per SG model and Revision phs-memory.com / speicher.de Sorry no deeplinks, see BAlfons' remark on ths

They specify as follows, so we probably do not need to open our boxes. However if you do, it would be interesting to know if they have two modules with 2GB or one module with 4GB.

Rev.2 has the following specs:

Device - Specifications

Computer memory - info

whereas the

Rev.3 has the following specs:

Device - Specifications

Computer memory - info

So order 2 x 8GB off ebay and stick them in.

The SG125 is an old beast and the DDR3 8GB sticks are cheap to be had these days that you can't go wrong. Providing you buy the right spec. 

Yeah RAM is dirt cheap these days for these smaller modules.

My SG is Rev3 and still in use though and I guess just 2GB more would be enough as the 75% RAM usage warnings are annoying. Another 4GB would do the trick for old UTM firmware for sure and reduce swapping. Of course different use case is if somebody wants to re-use it as a server and virtualize some machines.

I wonder if it could be upgraded to ECC as the underlying barebone seems to support ECC, based on the information the manufacturer is publishing: DNA1160/DNB1160 Again removing hyperlink: nexcom.com/Products/network-and-communication-solutions/cyber-security-solutions/desktop-x86-based-appliance/desktop-x86-based-appliance-dna-1160/Specifications

And here a small sneak peak into the SG125w Rev3: community.sophos.com/.../mini-pcie-slot-use-on-xg-125-rev-3 It is actually high res if you open the picture in a seperate window.

Keep in mind, that Rev3 (with HDMI port) and Rev1/2 (with VGA port) as mentioned above don't share the same spec.
The earlier revisions are based on the NexGen DNA-1150 with the infamous C2358 and it's AVR54 LPC clock output bug.

Keep in mind, that Rev3 (with HDMI port) and Rev1/2 (with VGA port) as mentioned above don't share the same spec.
The earlier revisions are based on the NexGen DNA-1150 with the infamous C2358 and it's AVR54 LPC clock output bug.

I will do some testing with the Rev. 3 and order Crucial RAM 8GB DDR4 3200MHz CL22 CT8G4DFRA32A 

It is a 3200Mhz Module, but should be backward compatible with 2400Mhz. I wish I had some ECC modules lying around to test, but I am not buying them on chance.

Can anyone verify that on the SG125 Rev 3 it is a Intel Atom C3508 or can tell me if lshw or hwinfo are installed on the UTM for command line?

If it is a Intel Atom C3508 it would even be only DDR 1866Mhz

Both utilities exist.

Robert Danzig said:

Can anyone verify that on the SG125 Rev 3 it is a Intel Atom C3508 or can tell me if lshw or hwinfo are installed on the UTM for command line?

If it is a Intel Atom C3508 it would even be only DDR 1866Mhz

Enable SSH in the UTM and do the following:

• From the Webadmin navigate to Management > System Settings > Shell Access section and enable the shell.
• Login to the UTM shell using Putty or another SSH client.
• Set passwords for both loginuser and root users.
• Login to the shell using the loginuser name.
• Use the su -- to change to root.
• From root execute the following commands: 
  • cat /proc/cpuinfo (this confirms the number of installed CPUs). 
• the output will show the the CPU model
• 

Thank you, yes I know, but not really my area. Anyway I did it our of curiosity.

So the RAM indeed is only clocked at 1866Mhz in alignment with the Atom C3508 at 1600Mhz. So the older 2400Mhz modules does make sense.

Today I installed Crucial RAM 8GB DDR4 3200MHz CL22 CT8G4DFRA32A for the SG125 Rev3 ( According to "lshw -short -C memory" it has DDR4 and clocks them only at 1866Mhz as stated above) and it seems that it just works fine as expected.

Actually 3200Mhz module was cheaper than older DDR4 2400Mhz modules and they are better than the old specs, but if needed can re-used them somewhere else.

If somebody does tests with ECC modules please let us know. It would be interesting and so much in line with a 24/7 Firewall/server style and supported by the Atom C3508.

So hopefully no more swapping or memory warnings.

Thank you for your support everybody alan weir  Jay Jay PhilippRusch BAlfson 

Great to hear that this works!