Memory Peak UTM release 9.605-1

Hi,

check some other SG 9.605.

Don't see this in local reporting.

Do you see the memory usage within local reporting too?

You may use TOP tool at your device and press "M" for sorting by memory-usage.

Seem some process is "eating" your memory an at 0/6/12/18 you get this memory back. (process is terminated or internal clenup run)

Do you alter/install something within your SG from CLI?

Hi Dirk,

Do you see the memory usage within local reporting too?

On Time  :  8.29

Do you alter/install something within your SG from CLI?

>>>>>>>  NO , 

Hi Bob, Sorry for late reply 

Management ->Up2Date ->Configuration

graph ram 9/11

graph cpu 9/11

Hi Dirk,

i'm use Sopho SG330  

I wanted to see if the graph in 'Logging & Reporting >> Hardware' for 9/11 matched the one you posted.

Cheers - Bob

These look like graphs from PRTG, is that correct?  I never got mine to read the UTM correctly, and stopped using it.

Hi Bob,

graph day 9/11 

These look like graphs from PRTG, is that correct?

yes graph on PRTG

i check my graph ,Physical memory on PRTG is equal to check on top ,ssh

PRTG physical memory graph

available memory 2500

and report from top ,ssh

We need to see graphs for the same time frame from PRTG and the UTM:

Cheers - Bob

Hi bob, 

to day (+07.00) 

graph on 

memory

CPU

Some of the issue that you are showing here are for one, your interval in PRTG.  You have it going every 30 seconds, so you are going to get a drilled down, more specific graph.  UTM's graphs are not that frequent and are going to show usage more... spread out and even.  This makes it more difficult to read and compare the PRTG/UTM intervals.  I *think* UTM is every couple of hours by default (Ask someone on that).  So, the spikes using PRTG are going to be more obvious and predominant.

I'd like to see the apples to apples comparison of that for what you posted.

On the UTM's graphs, the interval for daily graphs is 5 minutes, so the PRTG graphs have ten times as much detail.  The other issue is that the PRTG graphs adjust the scale to show the maximum of the values whereas the UTM graphs always use a scale of up to 100%.

Everything looks normal to me.

Cheers - Bob

On the UTM's graphs, the interval for daily graphs is 5 minutes, so the PRTG graphs have ten times as much detail.  The other issue is that the PRTG graphs adjust the scale to show the maximum of the values whereas the UTM graphs always use a scale of up to 100%.

Everything looks normal to me.

Cheers - Bob

Maybe run a atop logging and analyse this.

https://community.sophos.com/kb/en-us/121222