Hi there, i see very high RAM Usage on my UTM Why my RAM spike on 00.00/06.00/12.00/18.00/24.00 ? My Crontab Command Free on command line when Ram spike total used free shared buffers cached Mem: 12218532 11887892 330640 1718164 296368 9567316 -/+ buffers/cache: 2024208 10194324 Swap 4194300 244848 3949452 Graph 2 days Graph 30 days

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Memory Peak UTM release 9.605-1

ITS HENGLEASING over 5 years ago

Hi there,

i see very high RAM Usage on my UTM

Why my RAM spike on 00.00/06.00/12.00/18.00/24.00 ?

My Crontab

Command Free on command line when Ram spike

	total	used	free	shared	buffers	cached
Mem:	12218532	11887892	330640	1718164	296368	9567316
-/+ buffers/cache:		2024208	10194324
Swap	4194300	244848	3949452

Graph 2 days

Graph 30 days

This thread was automatically locked due to age.

Parents

0 dirkkotte over 5 years ago

Hi,

check some other SG 9.605.

Don't see this in local reporting.

Do you see the memory usage within local reporting too?

You may use TOP tool at your device and press "M" for sorting by memory-usage.

Seem some process is "eating" your memory an at 0/6/12/18 you get this memory back. (process is terminated or internal clenup run)

Do you alter/install something within your SG from CLI?

Dirk

Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum Partner
Sophos Solution Partner since 2003
If a post solves your question, click the 'Verify Answer' link at this post.
Cancel
Vote Up 0 Vote Down

Cancel
0 ITS HENGLEASING over 5 years ago in reply to dirkkotte

Hi Dirk,

Do you see the memory usage within local reporting too?

On Time : 8.29

Do you alter/install something within your SG from CLI?

>>>>>>> NO ,
Cancel
Vote Up 0 Vote Down

Cancel
0 dirkkotte over 5 years ago in reply to ITS HENGLEASING

look OK.

Wich device-type do you use?

Dirk

Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum Partner
Sophos Solution Partner since 2003
If a post solves your question, click the 'Verify Answer' link at this post.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 5 years ago in reply to ITS HENGLEASING

Hi and welcome to the UTM Community!

Please show the CPU Usage graph from Reporting in the UTM for 9/11. Also a screencap of your settings on the 'Configuration' tab of 'Up2Date'.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 ITS HENGLEASING over 5 years ago in reply to BAlfson

Hi Bob, Sorry for late reply

Management ->Up2Date ->Configuration

graph ram 9/11

graph cpu 9/11
Cancel
Vote Up 0 Vote Down

Cancel
0 ITS HENGLEASING over 5 years ago in reply to dirkkotte

Hi Dirk,

i'm use Sopho SG330
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 ITS HENGLEASING over 5 years ago in reply to dirkkotte

Hi Dirk,

i'm use Sopho SG330
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data