Can't reach full 10Gb when crossing VLAN ?

Hi,

when on the same VLAN the traffic will not be hitting the XG, but managed by your switch.

When on seperate VLANs then the traffic goes via the XG.

Do you have memory and CPU locked in size and exclusive use of the XG?

Ian

Yes indeed. And the machine is far from being heavy utilised anyway (around 7% load)

I can reply with a more exact detail later but never seen go above 40/60% range. 

I assigned the maximum 4 cores 

That is the combined core usage, interested in single core usage.

ian

Let me know how to figure this out and I’ll share back 

TOP wil show the details. You access the CLI via the console - advanced.

Ian

Thanks. 

this is what I see 

edit : added by core apologies 

im using iperf3 to “stress” the network

Is the screenshot from during testing or idle?

Ian

During test indeed. 
iperf3 -c client -t 60 to make it long enough to see the perf 

To confirm: first screenshot is before iperf3 second one is 15s into the 60s test. So core 3 is being used

Thank you for the update.

Next thing is to check the configuration of the VM drivers that they are showing 10gb.

Ian

I’m using VirtIO drivers. Is that correct ?

I’m using VirtIO drivers. Is that correct ?