Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 5614 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fail to install Sophos XG (Home Edition)

eatable2688

Hello,

I'm trying my best to boot the installer of Sophos XG Home Edition version SW-19.5.0_GA-197.iso from a 8GB USB 2.0 stick on my Intel i3-1115G4 CPU with 8 GB RAM but can't seem to find a way to properly boot the Installer

I tried Etcher on MacOS and Rufus in ISO and DD mode on Windows 10. None of them did a difference

I read about the BIOS Legacy boot mode, but the GRUB loader only seems to boot while on UEFI. Did some tests with the CSM settings. Whatever I do, the USB stick isn't recognized while using Legacy setting

Here's some of my BIOS settings :


The only thing in CSM I kept UEFI is the Video since the HDMI signal isn't working in Legacy mode

Is there anything you could tell to help me navigate in this difficulties?

Thanks in advance and regards!



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Peter Groft

    Hi,

    your post is totally irrelevant, you do not install xg on a MS computer. XG takes over the entire hardware and deletes the existing (hard format) information on the disk.

    Ian

    XG115W - v20.0.3 MR-3 - on holiday

    XGS118 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML