I refueled an XG125 Rev 3 with the home version.Everything worked with the stick, but I only have only 2 interfaces.All other interfaces are dead, with the original hardware ISO all interfaces work.Does anyone have an idea of what that could be?
You may try this: https://hifish.ch/en/2022/03/20/sophos-xg-home-on-a-sophos-appliance/
Mit freundlichem Gruß, best regards from Germany,
New Vision GmbH, GermanySophos Silver-Partner
If a post solves your question please use the 'Verify Answer' button.
Unfortunately, this problem is not described on the page.The installation worked fine, the problem is that only ports 5 and 6 work.
Auch freundliche Grüße aus Deutschland ;)
please post a copy of your interface page.
XG115W - v19.5 GA - Home
Test machine - Asus P10S-i E3-1225v5, 6gb, 4 intel NICs, v19.5 GA
The ports are disabled and i don´t know why.
Default is disable. Please configure interface. It should works.
Perfect, thank you.The ports are reversed, but ports 1 to 4 on the XG are displayed as ports 5-8.Is that normal?
Yes. Please refer this: community.sophos.com/.../510149