UTM Up2Date 9.702 Released

Today we've released UTM 9.702. The release will be rolled out in phases.

In phase 1 you can download the update package from our download server, in phase 2 we will spread it via our Up2Date servers.

Up2Date Information

News

  • Maintenance Release

Remarks

  • System will be rebooted
  • Connected REDs will perform firmware upgrade

Issues Resolved

  • NUTM-11688 [RED_Firmware] RED50 flash corruption fixes
  • And now our Red 15s are disconnected. Worked after removing and rejoining them except for 1 which I think is bricked

  • how to upgrade if your on really old versions e.g. 9.2.xxxxx still only use  package to upgrade it directly to standards or is there an upgrade path to be followed?

  • @Michael Maertzdorf: 9.2 is really really old ;) Not sure if the box has enough disk space to automatically download and extract the updates. If you have issues, disable automatic firmware update check, get the updates from download.astaro.com/.../ and update manually. Enable automatic firmware checks afterwards. It's a long journey though.

  • Why is this update categorized as "high urgency" update? Is it only because of the NUTM-11688 [RED_Firmware] RED50 flash courruption fixes?

  •  yes, that's correct. This release only contains the RED50 firmware and is highly recommended for all RED50 users. If you don't use RED50, there is no urgency to install the release now.

  • Updatet 22 Devices. 1 failed, some took a long time to come up again

  • Our RED 15 also disconnects after a few days.. Hope a restart will help

  • After upgrading to UTM 9.702, I see that the OpenSSH version is still at  6.6.1p1, which seems rather old. The latest OpenSSH release is 8.2. Does anyone know if you can manually upgrade OpenSSH on Sophos UTM?

  • with the date of installation, a Deutsche Telekom PPPoE Interface always shown as Offline and is no longer participating in WAN Failover.

  • SG135 / Firmware version: 9.702-1 / RED 15w

    When RED is in Operation mode: Transparent / Split, a route is not created in the Sophos SG routing table to get back to the source network (behind the RED).

    A standard static route being created, resolves the issue - places a route in the routing table and connection is now working. example;

    192.168.1.0/24 -> Interface RED (reds1)

  • User Group Networks not working in firewall rules. Only assigned network objexts of individual users objects will work used in a firewall rule.