Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 3835 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Device Control - Exempt single device only

dv883

Running Enterprise Conole v. 4.5.1.0

I have a Device Control Policy setup to block access to Floppy Drives.  The software detects the devices on all workstations that the policy applies to.  I see the devices being blocked uder the "Add Exemption" list.

I would like to use the option to "exempt device only" but it is greyed out.  The only option I have is "all devices of this model"

Any suggestions would help!

Thank You!

:8353


This thread was automatically locked due to age.
Parents
  • 0

    Hi Christian

    Thanks for the reply. What you said makes sense. 

    What my goal was is to block all floppy drive access, and then set 4-5 exceptions to allow.  I also wanted to do the same with Optical Drive WRITE access.  But from what I understand, unless a device has a unique indetifier I can not make that exception.  And I am going to guess that the majority of floppy and optical devices do not have that unique identifier.

    :8441
Reply
  • 0

    Hi Christian

    Thanks for the reply. What you said makes sense. 

    What my goal was is to block all floppy drive access, and then set 4-5 exceptions to allow.  I also wanted to do the same with Optical Drive WRITE access.  But from what I understand, unless a device has a unique indetifier I can not make that exception.  And I am going to guess that the majority of floppy and optical devices do not have that unique identifier.

    :8441
Children
No Data
Unfiltered HTML