This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting up wireless Access for the UTM9 Home

Not sure this is the correct place but I will give it a try.
I am looking for any help on setting up wireless access on my UTM9 home F/W. I do not know if I just need to buy an AP or something else. Please any help would be greatly appreciated.

This thread was automatically locked due to age.

Parents

0 BarryG over 11 years ago

Hi,

You can use a consumer AP or Router, or you can buy a Sophos AP.
You can see the prices on CDW:
Search Results

The Sophos APs do give you features that most consumer routers don't support, such as VLANs, multiple SSIDs, etc.

DDWRT can do VLANs on many consumer routers though:
https://community.sophos.com/products/unified-threat-management/astaroorg/f/51/t/21666

If you use a consumer router, see my HowTo at:
https://community.sophos.com/products/unified-threat-management/astaroorg/f/51/t/21968

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 JamesSteen over 11 years ago in reply to BarryG

Thanks guys. I will look into it. I am getting ready to "Try" to implement wireless behind Astaro UTM 9 for the first time.
My wife needs it for her nook and her works lappy.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 JamesSteen over 11 years ago in reply to BarryG

Thanks guys. I will look into it. I am getting ready to "Try" to implement wireless behind Astaro UTM 9 for the first time.
My wife needs it for her nook and her works lappy.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Breakingcustom over 11 years ago in reply to JamesSteen

I would just flash a Cisco E3000 if you can find one with DD-WRT. You'd have to go with the AP50 which is about $400 to get dual band capabilities.

You could pick up a refurbished E3000 which does dual band for like $30-40 on Ebay.

If you don't need VLAN tagging or anything you should be fine with just the stock firmware then.
Cancel
Vote Up 0 Vote Down

Cancel