This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Limit URL by IP address

So I currently have a few webservers that the virtual server forwards to. These servers have some rules in place that limit who can view the content to specific IP addresses. I was wondering if there is a way with the Astaro that I can put these rules into place at that layer instead of allowing those IPs through to those servers. This is only for a few URLs that I have. Thanks.

This thread was automatically locked due to age.

Parents

0 BAlfson over 12 years ago

You're right, you can't use URLs in a DNAT.

When you upgrade to V9, there might be a way to do this with an Additional Address, DNATs and Site-Path Routing. Can you give an example of a restricted URL and one that starts out with the same FQDN but is unrestricted?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 12 years ago

You're right, you can't use URLs in a DNAT.

When you upgrade to V9, there might be a way to do this with an Additional Address, DNATs and Site-Path Routing. Can you give an example of a restricted URL and one that starts out with the same FQDN but is unrestricted?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data