Multiple VPN Profiles

Hello Rico Stiekel,

Thank you for reaching out to the community, you can refer the following KBAs below:
1.) Sophos Connect: Command line interface (CLI) guide - https://support.sophos.com/support/s/article/KB-000038531?language=en_US
2.) Deploy Sophos connect MSI using script via GPO - https://support.sophos.com/support/s/article/KB-000040793?language=en_US
3.) Sophos Connect provisioning file - https://docs.sophos.com/nsg/sophos-firewall/18.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/VPN/RemoteAccessVPN/VPNSConProvisioningFile/index.html
4.) Configure IPsec remote access VPN with Sophos Connect client - https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/RemoteAccessVPN/HowToArticles/RAVPNIPsecSConClient/index.html

Additionally, you can Push to C:\Program Files (x86)\Sophos\Connect\import

Hello Rico Stiekel,

Thank you for reaching out to the community, you can refer the following KBAs below:
1.) Sophos Connect: Command line interface (CLI) guide - https://support.sophos.com/support/s/article/KB-000038531?language=en_US
2.) Deploy Sophos connect MSI using script via GPO - https://support.sophos.com/support/s/article/KB-000040793?language=en_US
3.) Sophos Connect provisioning file - https://docs.sophos.com/nsg/sophos-firewall/18.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/VPN/RemoteAccessVPN/VPNSConProvisioningFile/index.html
4.) Configure IPsec remote access VPN with Sophos Connect client - https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/RemoteAccessVPN/HowToArticles/RAVPNIPsecSConClient/index.html

Additionally, you can Push to C:\Program Files (x86)\Sophos\Connect\import

Do i have to configure something on my UTM 9 to make the provisioning file work? 

I get an error ->

Rico Stiekel said:

"Unable to connect to policy gateway."

The one i made wont work.

[
    {
        "gateway": "<Public IP of our Firewall>",
        "user_portal_port": 443,
        "otp": false,
        "auto_connect_host": "<Internal IP of the Firewall>",
        "can_save_credentials": true,
        "check_remote_availability": false,
        "run_logon_script": false
    }
]

There is a techvid in the provisioning kba shared above.

As i know, provisioning file is for Sophos XG/firewall only - not for SG/UTM.
If you try to import two configurations with the same destination, the 2nd configuration will overwrite the first.
2 definitions (user) for the same destination do not work.

Thank you, that helps me a lot! 

Thanks & Regards