Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 6072 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installing SUM on VM

Karsten

Hello

I am currently trying to install a SUM (newly downloaded, new version) in a kvm environment.
But already at the start, I run into troubles.

The installation cant detect my storage and I cant see anyway to provide at driver.

I have tried to install UTM9. It worked right out of the box, with no special requirements.

Anyone have some experience in this?



This thread was automatically locked due to age.
Parents
  • 0

    I haven't checked, but believe there is a KVM version of the ISO?

    When I built my SUM on the VM I used the standard ISO.

     

    Amended incorrect information. Changed UTM to SUM.

    Both are correct.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    The VM version of the SUM-image are discontinued.

  • 0 in reply to Karsten

    The VM ISOs were all discontinued - just use the regular ISO.  Can you see where the installation is hanging - on which driver?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Detecting storage devices
    Detecting storage devices
    Storage controller: Qumranet Qemu virtual machine
     Driver: ata_pixx,ata_generic,pata_acpi
    Storage controller: Qumranet SCSI storage controller
     Drivers: virtio_pci
    Detecting disks
    Kernel: [662.648351] BIOS EDD facility v0.16 2004-jun-25, 1 devices found
    No disk found, retrying after some time (2)
    No disk found, retrying after some time (1)
    No disk found, retrying after some time (0)

  • 0 in reply to Karsten

    How is the scsi controller setup, if a raid array the install will not see the disks?

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply Children
Unfiltered HTML