This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Install on UTM Hardware : Cannot use ACC software license on ASG1xx device

According to the SUM Feature Summary:
Install on UTM Hardware: It is now possible to install SUM on UTM hardware appliances. (Note this will completely format and re-purpose the appliance as SUM, it will no longer be a UTM!) While SUM is designed to be installed on your own, dedicated hardware platform, virtual machine, or Amazon Cloud instance, you asked us to be able to run SUM on UTM appliance hardware, and we've enabled that.
 
So I have installed SUM4 on an old ASG 120. Installation went smoth. Install the backup file from the ACC V3 worked. [:)]
Once I login the system asks for a license file, nothing easier than this. [:P]
Bummer: I get an Error: Cannot use ACC software license on ASG1xx device [:@]
So this is no fun, instead of able to reuse old hardware!???? [:O]


This thread was automatically locked due to age.
Parents Reply Children
  • Hi Smart Thinker,

    just install the hardware with a hardware iso. There you get a 30 days trail license.

    After the install you can login to webadmin and enable ssh.

    Then you can go on as described.

    You have to rename/remove that file because this file indicates the maschine as a Sophos hardware.
    If the maschine thinks it is a hardware you can not install the software license.

    Best Regards
    DKKDG

  • Hoi and welcome to the UTM Community!

    In fact, there are some tricks to using the free home-use license with a hardware appliance.  See Use Appliance with a home license.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA