This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Mesh topology

We have a customer with an UTM at central site and is going to implement RED devices to connect some remote offices

Is it possible to configure the remote office's RED devices in a Mesh topology which connect them to the corporate main Office AND to each of them directly ?

Thanks

This thread was automatically locked due to age.

Parents

0 sachingurung over 8 years ago

Hi Stefano,

Yes, if you wish that networks behind two separate RED devices should communicate with each other then, you need to configure both the RED in Split mode. Alongside, the RED#1 network must be in 'Local networks' for RED#2 and vice versa.

Thanks

Sachin Gurung
Team Lead | Sophos Technical Support
Knowledge Base | @SophosSupport | Video tutorials
Remember to like a post. If a post (on a question thread) solves your question use the 'This helped me' link.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 sachingurung over 8 years ago

Hi Stefano,

Yes, if you wish that networks behind two separate RED devices should communicate with each other then, you need to configure both the RED in Split mode. Alongside, the RED#1 network must be in 'Local networks' for RED#2 and vice versa.

Thanks

Sachin Gurung
Team Lead | Sophos Technical Support
Knowledge Base | @SophosSupport | Video tutorials
Remember to like a post. If a post (on a question thread) solves your question use the 'This helped me' link.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 StefanoColombo over 8 years ago in reply to sachingurung

Hello ,

do you have , or can point me to ,any documentation or guides on how to do that ?

thanks
Cancel
Vote Up 0 Vote Down

Cancel
0 sachingurung over 8 years ago in reply to StefanoColombo

Hi,

The guide does not provide you with the actual configuration steps but, you can configure a split tunnel for RED and define the Red network on the local network section of both the RED config policies respectively.

Please refer: https://www.sophos.com/en-us/support/knowledgebase/116573.aspx

Thanks

Sachin Gurung
Team Lead | Sophos Technical Support
Knowledge Base | @SophosSupport | Video tutorials
Remember to like a post. If a post (on a question thread) solves your question use the 'This helped me' link.
Cancel
Vote Up 0 Vote Down

Cancel
0 StefanoColombo over 8 years ago in reply to sachingurung

Does it make any difference whether we use standard/split or transparent/split ?

thanks
Cancel
Vote Up 0 Vote Down

Cancel
0 sachingurung over 8 years ago in reply to StefanoColombo

I will recommend standard/split.

Thanks

Sachin Gurung
Team Lead | Sophos Technical Support
Knowledge Base | @SophosSupport | Video tutorials
Remember to like a post. If a post (on a question thread) solves your question use the 'This helped me' link.
Cancel
Vote Up 0 Vote Down

Cancel