Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 3631 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Replacing EOH RED with New RED Devices

RyanHosiassohn

Hey All, 

What would be the best way to do this : 

Replacing EOH RED with New RED Devices

So the old RED is being exchanged with a new RED. How do we change it to the new one with the same config ? 

As I believe it locks in the Device ID 



This thread was automatically locked due to age.
Parents
  • 0

    It is Simple with UTM.

    Connect the new RED to your UTM using the same parameters as the old device.

    Go to network and within network-definition change hardware from old-RED to new-RED.

    Thats all.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    It is Simple with UTM.

    Connect the new RED to your UTM using the same parameters as the old device.

    Go to network and within network-definition change hardware from old-RED to new-RED.

    Thats all.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data
Unfiltered HTML