Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 5 subscribers
  • Views 4206 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[Solved] - User error - UTM not accepting a firewall rule (or... I'm an idiot) help please

SalishSwede

So this is basic

I'm setting up a firewall rule to allow specific VPN traffic

Here's the specific service definition


Attempting to setup a VPN, I get this...

Here are some of the same drops from the full firewall log


Why is this traffic getting blocked?

Key concern is the destination address.
Why is this traffic going to the network address?
This is an Android device so there  little hope of finding a rational adult there to assist.
I'm just hoping I can find some answers here.



This thread was automatically locked due to age.
Parents
  • 0

    I found a work-around which is not a solution.
    I can create a VPN while not connected to the UTM generated WLAN.
    Then  connect the phone to the WLAN.  The VPN remains stable, but I still cannot establish a new VPN connection on my Android phone using the UTM.

Reply
  • 0

    I found a work-around which is not a solution.
    I can create a VPN while not connected to the UTM generated WLAN.
    Then  connect the phone to the WLAN.  The VPN remains stable, but I still cannot establish a new VPN connection on my Android phone using the UTM.

Children
No Data
Unfiltered HTML