Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 5 subscribers
  • Views 1525 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

error on opening LiveLog window on UTM 9 SG135

Rolf Spengeler

Hello 

When i open the LiveLog on my UTM 9 every time the following error window pops multiple up:

Can't use string ("0") as a HASH ref while "strict refs" in use at /wfe/asg/modules/asg_logging.pm line 2260.

i tried via ssh to rebulid the DB without any success.

 

what can i do ?

Thank you for your help

Best Regards

Rolf

 



This thread was automatically locked due to age.
Parents
  • 0

    Hallo Rolf and welcome to the UTM Community!

    I suspect that you will need to get some config backups off your 135 and re-image from ISO.  Before you do that, get a ticket open with Suppot to have them tell you that re-imaging is your only solution.  Please let us know the result

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hallo Rolf and welcome to the UTM Community!

    I suspect that you will need to get some config backups off your 135 and re-image from ISO.  Before you do that, get a ticket open with Suppot to have them tell you that re-imaging is your only solution.  Please let us know the result

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML