Wich PCI-E W-Lan cards for UTM Home?

Hi Meghan,

The only internal WiFi supported is one of the Atheros PCI cards that's used in the SG 1x5w series.

Cheers - Bob

Hi Meghan,

The only internal WiFi supported is one of the Atheros PCI cards that's used in the SG 1x5w series.

Cheers - Bob

Hi,

wich Atheros chipset is used at sg 1x5 series?

Regards Meghan

Google site:community.sophos.com/products/unified-threat-management/f atheros PCI, limiting the search to 1/1/2016 to today.

Cheers - Bob

in this thread https://community.sophos.com/products/unified-threat-management/f/wireless-security/56517/software-appliance-with-wlan

there is some Sophos SG125W Hardware listed with

0b:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:003c]

So I think devices with chipset QCA988x/986x using 168c:003c PCI ID

But the question is, are the drivers for SG hardware in software image?

Best

Alex

P.S. Maybe this one is interesting too http://skyline-bw.com/wordpress/2016/11/20/compex-wle200nx-mit-sophos-utm/

"...  are the drivers for SG hardware in software image?" - They must be, otherwise how would people have gotten internal WiFi cards to work?

Cheers - Bob

I think the Compex WLE600VX has that ID. Whether it works or not is another matter. I have one on order so I guess I'll know soon enough.

To what I've read on the internet the Compex WLE600VX was working. According to https://wikidevi.com/wiki/Rivet_Networks_Killer_Wireless-AC_NIC_1420

that ID 168c:003c should be Rivet Networks Killer Wireless-AC NIC 1420. I'll give that a try too, if that thing is arriving from china. Because I need NGFF the Compex isn't suitable for me.

Best

Alex

Hi,

@Jack Dowland: Please let us know whether that Card works!

@all: Thank you for your lots of answers!

Regards Meghan

The card arrived today. I haven't had a chance to install it yet. In fact, this is my first Sophos box.  I'll be putting it together at the weekend and I'll definitely report back with my findings :)

Hi, Jack, and welcome to the UTM Community, and your first interaction is helping out - awesome!

Cheers - Bob

Thanks for the warm welcome, Bob :)

OK, I've just installed 9.5 on my system. It's a small embedded device with the N3160 CPU and dual Intel NICs. Contrary to my expectation, I had no problems with an HDMI install. All hardware was recognised during the install except the WiFi card. Unfortunately, I can't set up the device fully today. I will do so at the weekend. Is it possible that the card will be recognised on initial boot?