Thread Info
  • Locked Locked
  • Replies 43 replies
  • Subscribers 31 subscribers
  • Views 63595 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DO NOT INSTALL 9.352-6 or 9.318-5

BAlfson

See the thread "UTM Version 9.352-6 and 9.318-5 released"

Cheers - Bob



This thread was automatically locked due to age.
  • in reply to Ronn
    no. rollback is not supported.
    you need to reinstall with an older-iso version and need an older backup fitting the install-version to import then.

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

  • in reply to KSteffen
    fix didn't help. But yes it has something todo with the routing i can ping devices behind the red when i use the internal utm ping tool but only when i say interface red xxx. When i choose "use closest route" it doesn't work.

    also the red is full up dns changes etc. are all working,
    deleting the red also doesn't help :/
  • The fix for 9.318 is to Up2Date to 9.351.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • in reply to BAlfson

    All my executive reports now show like this:

    Anyone else run into this issue after updating to 9.352-6??

  • in reply to BlueRue

    BlueRue said:

    All my executive reports now show like this:

    Anyone else run into this issue after updating to 9.352-6??

    Same issue here.

    --------------------------------------------------------------------
    Sophos UTM 9.719-3 - Home User
    Virtual machine on Dell Optiplex 3070
    i3-9100 @ 3.60 GHz, 16 GB RAM
    --------------------------------------------------------------------

  • in reply to Jeff x
    I am not having that issue on 9.351-3 but as soon as I upgrade to 9.352-6 the reports don't show right.

    Home User on SG-115 Appliance
  • in reply to BlueRue

    BlueRue said:
    I am not having that issue on 9.351-3 but as soon as I upgrade to 9.352-6 the reports don't show right.

    Same for me. I think you saw "9.351-3" in my signature and thought I was referring to that version. I wasn't ;-)

    I've already reverted back to 9.351-3. No more issues.

    --------------------------------------------------------------------
    Sophos UTM 9.719-3 - Home User
    Virtual machine on Dell Optiplex 3070
    i3-9100 @ 3.60 GHz, 16 GB RAM
    --------------------------------------------------------------------

  • in reply to Jeff x
    All I get is a little blue box.

    More importantly when is Sophos going to release a fix for this?

    I don't get the backend issue if I don't use flow display.


    Ian

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

  • i have this problem also like (AndreasRieger)
  • Charts in dashboard do not show, and also the flow monitor is not working anymore after update to 9.352-6 (Backend connection Failed all the time). Incredible to release such a instable Firmware.
Unfiltered HTML