Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 1733 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

eth0 and eth3 swapped and unusual / wrong IP (192.168.2.100) on new SG UTM

Hannes Klein

Hi,

I currently install a brand new sg115. This model seems to have swapped eth0 and eth3 interfaces.

For first configuration I have to connect the lan cable to eth3 (no network link on eth0) an then I can access the 192.168.2.100 (instead of the usual 192.168.0.1). After running through the wizard the dashboard tells me that eth0 is up with 192.168.2.100 while the only cable which is plugged in is conntected to eth3 and the eth3 lamp is lit.

What I tried:

  * Looking for a possibility to change the interface assigning

  * resetting to factory defaults

Any idea what to do? Thanks!

 



This thread was automatically locked due to age.
Parents
  • 0

    Hallo Hannes and welcome to the UTM Community!

    Very strange - this should not happen!  Since this is a new unit, I would have it replaced with an RMA if Sophos Support can't fix it remotely.  Please let us know your result.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Finally I got an answer.

    Yes, this Sophos has the wrong OS

    Download ISO from:  www.sophos.com/.../utm-downloads.aspx

    Create a bootable USB stick or DVD and reinstall the UTM.

    The added howto suggests to use "rufus", a free tool for creating bootable USB drives. At VirusTotal 4 engines report AddWare in this tool so I did the usual dd-voodoo instead.

    Thanks for the help!

Reply Children
No Data
Unfiltered HTML