Help us enhance your Sophos Community experience. Share your thoughts in our Sophos Community survey.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG-210 ein- und ausgehende Internetgeschwindigkeit

Hallo

Dies ist mein erster Beitrag hier in der Community und ich hege die Hoffnung hier den ein oder anderen Tip zu meinem
Problem zu bekommen.

Bei uns eingesetzt ist:
SG-210
Firmware Version: 9.407-3
Total Protect Subscription


Kommen wir nun zu meiner Frage bzw. meinem Problem:
Was für eine Einschränkung hat die Sophos bezüglich eingehender Internetgeschwindigkeit bzw. wo kann man überall
drehen und schrauben damit die Bandbreite von uns ins Internet gedrosselt sein könnte?

Hintergrund:
Bis letzte Woche hatten wir ein schnuckelige 10 Mbit Standleitung, hier war es natürlich kein Problem die "volle"
Bandbreite aus zu nutzen.
Nun haben wir hier eine 1 Gbit Leitung, aber bei Speedtests kommen wir im Up- und Download nicht über 270 Mbit raus,
zumindest bei Rechnern die hinter der Sophos sind.
Klemme ich einen Rechner direkt ans Internet sieht die Bandbreite gleich wieder ganz anders aus, also mit einer
Bandbreite die zufriedenstellend ist.

QoS ist alles deaktiviert was mal (zu 10 Mbit Zeiten) aktiviert war, also keine Bandwidth Pools oder Download Throttling
aktiv.

Hat hier jemand eine Idee an was es liegen kann, wo wir vielleicht aus versehen eine Option aktiviert haben die uns
die Bandbreite so dermaßen beschneidet?

Vielen Dank



This thread was automatically locked due to age.
Parents
  • Hallo Hanne,

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    Welcome to the UTM Community!

    The limiting factor for speed measurements on a single client is the Intrusion Prevention engine.  Snort is single-threaded, so 270 Mbps is about the best you'll get with that processor.  You will see that same measurement even if others are downloading at a total of 500 Mbps.  The limitation is per-client - your users combined should be able to fill the 1Gbit pipe.

    (PS Your German is beautiful.  Very descriptive word choices.  Nice flow.)

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hallo Hanne,

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    Welcome to the UTM Community!

    The limiting factor for speed measurements on a single client is the Intrusion Prevention engine.  Snort is single-threaded, so 270 Mbps is about the best you'll get with that processor.  You will see that same measurement even if others are downloading at a total of 500 Mbps.  The limitation is per-client - your users combined should be able to fill the 1Gbit pipe.

    (PS Your German is beautiful.  Very descriptive word choices.  Nice flow.)

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data