Wireless Hotspot Device Exeption

Hi, Philip, and welcome to the UTM Community!

I think you haven't gotten an answer because it's not clear exactly what you're asking...

"i have some devices (games consoles, mobile phones etc) which i want to be connected to the network all the time but not on the internal network."

By that do you mean that you want those devices to be able to connect via WiFi to the Internet?  Are any (like the game consoles) connected via Ethernet cable to your internal network?  Can you add another Ethernet NIC to your device running UTM?

"Internal wireless network & Guest Hotspot network."

By that, do you mean that the TP-Link AP has the capability of two (and only two) separate WiFi SSIDs/networks and that you have bridged your Internal network with the Internal wireless network?  How does the TP-Link separate the traffic - using VLANs?  If so, what VLAN tags are you using?

Cheers - Bob

Thanks for your reply Bob,

Yes, i would like to connect these devices wirelessly to the WAN without connecting to Internal or requiring a code because of the hotspot.

No the TP-Link has the capability of up to 4 SSID's. Traffic for internal wireless & guest wireless is separated via VLANS. Internal is VLAN 43 and Guest is VLAN 44.

Many Thanks

Hey Philip.

It's fairly simple, actually. Create another VLAN interface on Sophos UTM and another SSID on TP-LINK bound to the same VLAN. Then configure DHCP server, firewall rules and web protection profiles as required, much like you have for your internal network. Also, don't forget to create a masquerade NAT to the new VLAN.

Regards,

Giovani

Hey Philip.

It's fairly simple, actually. Create another VLAN interface on Sophos UTM and another SSID on TP-LINK bound to the same VLAN. Then configure DHCP server, firewall rules and web protection profiles as required, much like you have for your internal network. Also, don't forget to create a masquerade NAT to the new VLAN.

Regards,

Giovani

Hello Giovani,

Thank you for the response. I too thought this would work! However when I set up another port group on VMWare ESXI with another vlan number and added the NIC to sophos I lost all communication. I had to plug directly into the firewall to get into WebAdmin. It appears that an error occurs on the WAN interface. After looking in the logs I can see sophos is complaining of a Configuration change.

Many thanks

I found a similar thread with the same issues regarding addition of NICS

community.sophos.com/.../vlan-problem-on-virtual-utm-setup-on-esxi-6

It was working before, right? You already had three interfaces, one for WAN with no VLAN tags and two for LAN and Guest, with VLAN tags, right?

Perhaps your interfaces got reordered when you added another VLAN interface on the VM. It used to be a problem with ESXi. I don't know if this still happens as I have very little contact with ESXi.

Check this and see if it helps you.

Regards - Giovani

Thanks,

I have tried to look into that additional tread you shared however i fail at the first step.

When SSH'ed to VMWare, the commang "cd /etc/udev/rules.d" fails as the udev path doesnt exist.

Thanks

No, you got it wrong. SSH into the UTM or use the VM console.

Regards - Giovani

Ah thanks Giovani, However again the folder doesnt exist on the Sophos UTM.

Kind Regards - Philip

Philip, I don't see how this would be possible. This is a core linux system component. Would you care to share some screenshot of what you are doing?

Regards - Gioovani

Of course!

Maybe you need a little background on using cd on Linux.

Repeat the first command, but this time put a space between "cd" and "/etc/udev/rules.d".

reagrds - Giovani

Must not be my day today!