Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 8 subscribers
  • Views 1965 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SG210 2 WAN Interfaces Failover

Patrick Derlet

Hi, 

I have a Sophos SG210 with 2 WAN interfaces configured. If one line fails, the system should automatically switch to the other interface. When the defective line is working again, the primary line should be activated again. This is a slow connection and a fast connection. 

Thanks a lot !

Patrick



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Patrick Derlet

    @Erick: This is SG-UTM, not Sophos Firewall (XG/XGS)

    @ Patrick

    On UTM, you have Uplink balancing and with the list at „Active Interfaces“ you can define the order and give them a weight with that small „tool“ Button at the top of the list. In Addition you have Multipath rules.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML